User manual

3. Quick Guide
06 ENGLISH
3.1 Instructions for quick measurement
3.2 Transponder control
1. Connect the antenna to the LNB input of the Satmeter.
2. Turn on the meter - it seems the Search menu. Use the pq buttons to switch bet-
ween the individual values (satellite, transponder, ...)
3. Use the t u buttons to change the satellite, and press OK to enter the value manually.
4. Once the coaxial has been connected properly and the settings have been entered
correctly to the satellite search, the corresponding values of the measurement on the
screen are displayed.
5. Please read the manual carefully to discover all the features.
If you want to calibrate a satellite system
with a Quattro LNB, this will help you
control for a total overview of all LNB
levels.
If you are in search menu, press the F3
key to get into the transponder control.
Here you will see all levels of the LNB
shown (HL / VL / HH / VH). Thus, once
each terminal are checked for signal
strength and quality.