User manual

07ENGLISH
3. Quick Guide
3.3 The Search Display
1
4
2
3
6
8
9
5
7
10
11
1. Satellite Displays the current satellite. Use the t u keys to change
the satellite. Press OK to enter the Satellite list. Use the pq
buttons to the desired, and click OK to confirm.
Transponder Displays the current transponder. Use the t u keys to switch
the transponder. With OK you can have a Transponder
manually enter (use this the change pq buttons to the
value). Click OK to confirm.
2. 22 K Displays the current 22 K status.
3. LNB Typ Displays the current LNB type. Use the t u keys to change
the LNB type. Press OK to enter the LNB list. Use the pq
 buttons to select type, and click OK to confirm.
4. LNB Power Status Displays the current status of the LNB
(18 V = horizontal / 13 V = Vertical)
5. Lock Status Displays that the selected satellite is found.
6. PWR Displays the current level of the signal in dBµV.
7. STR Displays the current signal strength.
8. CNR Displays the current CNR value of the signal.
9. BER Displays the current BER value of the signal.
10. QLT Displays the current signal quality.