User manual

09ENGLISH
4. Main Menu
4.2 LNB Settings
1
3
4
6
2
5
7
1. Satellite Displays the current satellite. Use the t u keys to change
the satellite. Press OK to enter the Satellite list. Use the pq
buttons to desired, and click OK to confirm.
2. Transponder Displays the current transponder. Use the t u keys to switch
the transponder. With OK you can have a transponder
manually enter (use this the change pq buttons to the
value). Click OK to confirm.
3. LNB Typ Displays the current LNB type. Use the t u keys to change
the LNB type. Press OK to enter the LNB list. Use the pq
buttons to select type, and click OK to confirm.
4. 22 K Displays the current 22 K status. Use the t u keys to the
switch between ON and OFF.
5. PWR Displays the current status of the LNB. Use the t u keys to
switch between the AUTO, 18V and 13V.
(18 V = Hotizontal / 13 V = Vertical)
6. DiSEqC / Unicable Use the t u buttons to select the desired DiSEqC switch or
Unicble port.
7. Motor Typ Use the t u buttons to select the type of engines.
Choose between fixed antenna, USALS and DiSEqC 1.2.