User manual
ENGLISH ENGLISH
32
33
Settings Troubleshooting
Confirm the programming with OK button and it will appear in the timer list.
With the RED button, you can edit the settings. With the GREEN button you can delete the programming.
Press the EXIT button to exit timer setting.
Set Default
You have the possibility to undo all the settings and
changes, where you load the default settings. Go to
the option and may confirm with the OK button.
Note:
All settings are reset. You must then continue to per-
form the search again.
SW Update
The menu SW update contains two options:
• Update via USB
• Backup via USB
You have the opportunity to update the software via
USB memory. Start this feature with the OK button.
Note:
The memory should only contain only the update file.
If the file is found, then the process will start automa-
tically.
During the backup, you can save the user database to memory. This contains your personal settings, the selec-
ted satellite and the TV channels found. Press the OK button to save the database. A short message appears on
the screen.
Accessories
The accessory includes a game Gomoku (5 wins), a calendar and a simple calculator.
Symptom Correction
No DVB-S reception / serious
distortion by mosaics or artefacts /
freeze pictures
• No DVB-S reception in your region.
• Realign the dish. Please pay attention to the direction of the
satellite.
• Please use a bigger dish.
• Retry the Auto Scan.
No power • Plug the power cord into the outlet tightly and turn on the
power.
Can not scan programs • Adjust the dish
• Refer settings for searching
No picture / no coloured pictures • Control the connection to the TV set.
• Control the video output mode in the setup.
• TV channel or program is scrambled
Remote control does not work • Change the batteries.
• Operate within normal range (max. 5 meters, 30 °)
• The sensor is pointed to by bright light.
No sound • Cancel Mute. Press MUTE button
• Increase volume. Press VOL+ button
• Pay attention to connection to TV set or amplifier.
Audio / Subtitle without function or
can no choose
• Change audio track (press AUDIO button)
• Change subtitle track (press SUBTITLE button)
• Other audio track is not supported
• Subtitles are not supported by broadcaster