User manual

ENGLISH ENGLISH

• 3.5 Inch TFT LCD Screen Display

• Input Frequency: 950 ~ 2150 MHz

• Input Level: -65 ~ -25 dBm

• Input Impedance: 75 Ω

• Measurement Type: Signal strength,

Quality; BER; S/N;PWR

• Search Mode: Auto, Blind, Manual

• Sound and Light Alarm

for Locking Signal

• Auto Calculate Angle of AZ ,EL

• Supporting DISEQC 1.0,1.1,1.2 and

22khz Tone

• LNB Power Supply:18/13V(IMax 400mA)

• Support both AV out and AV in

• Speaker Integrated

• Max Operating Time:4 hours

• Search

• Install

• Multimedia

• System

If you have installed and connected the cables to the meter, pressing MENU key to

display the Main Menu.

Note 1: When the adapter insert dc slot,Charging indicator scintillation three times,

then the indicator is often bright, when the batteries charged suﬃcient, the charge

indicator is going out.

Note 2: When the battery is on power failure, a voice alarm, please a timely charge, do

not continue to be used to avoid the internal battery runs out and shorten the usage

time.

Press the keys of to move

the cursor up or down in the menu

interface, then use OK key to

conﬁrm a selection.

1.4 Installation of meter

2. Outline

3. The menu OSD instruction