Brillantes Fernsehen SAT>IP Server Deutsch BENUTZERHANDBUCH
1. So finden Sie die Server IP mit dem UPnP Werkzeug Schritt 1: Downloaden und installieren Sie Intel-Tools für UPnP-Technologie Schritt 2: Öffnen Sie „Device Spy“ 2. Login Seite: Sie können sich in den SAT>IPServer mit Verwendung einer spezifischen IP Adresse. Als erstes wird gezeigt, wie die lokale IP-Adresse ermittelt wird. Durch einen Browsern sind Sie in der Lage, zur Login-Seite zu gelangen, die die auffordert ein Kennwort einzugeben. Das voreingestellte System-Passwort lautet: satip_admin.
4. Netzwerk Einstellung • Netzwerkschnittstelle: Das Standard Netzwerk des SAT>IP Servers nutzt das Ethernet-Netzwerk. Sie müssen in der Regel keine weitern Einstellungen am Netzwerk vornehmen. • IP Einstellung: Automatisch oder Statischer Modus kann ausgewählt werden. Die Standard Einstellung hierfür ist Automatisch. Der SAT>IP Server besitzt keine DHCP Funktion, daher muss er an einen Router mit DHCP Unterstützung betrieben werden.
6. LNB Einstellung: Der SAT>IP Server unterstützt Quad, Quattro, und Uni-LNBs (Universal). Sie müssen keine Einstellungen vornehmen, wenn sie ein Quad und Quattro LNB installieren. In bestimmten Regionen oder Ländern können Frequenzen von LNBs unterschiedlich sein. Sie können die Einstellungen der Frwquenzen einstellen. LNB Einstellung 7. Diagnose Die Tuner des SAT>IP Server unterstützen zwei verschiedene Modi: Dynamischer und Statischer Modus. Die Standardeinstellung ist der dynamische Modus.
Statischer Modus Nach Klicken auf die Schaltfläche Übernehmen, wird die Signalsperre, Signalstärke und Qualität angezeigt. Mit dem „Signal Lock Status“, können Sie herausfinden, ob obige Einstellung evtl. nicht korrekt sind oder etwas in den Einstellungen falsch ist. Bitte beachten Sie, dass dem statischen Modus eine PID zugeordnet werden muss. Hier sehen Sie die Einstellungen der Tuner 1, 2, 3, 4. Sie können jeden aus dieser 4 Tuner in den statischen Modus ändern.
8. System Status: Alle 4 Tuner und der Streaming-Status kann in der Funktion überwacht werden. Darüber hinaus kann der System-Status helfen, wenn Probleme auftreten. Mit diesen Informationen können Sie sicherstellen, dass das erforderliche Signal die korrekte Einstellungen und eine Verbindung zu dem SAT>IP Receiver hat. 9. UPnP Einstellung Der UPnP Gerätename kann mit dieser Funktion geändert werden. Er wird bei den Clienten (Receivern) angezeigt: 10.
Exportieren: Diese Funktion hilft Ihnen, die Einstellungen im System zu sichern und zur Klärung, falls Probleme auftreten sollten. Unternehmen die das System installieren, können die Einstellungen in der Firma vornehmen und dem Endverbraucher eine XML-Datei senden. Der Name der Export-Datei muss „satip_settings“ sein.
Brillantes Fernsehen SAT>IP Server English Stand: v1.
1. Find out the Server IP with UPnP tool Step 1: Download and Install Intel Tools for UPnP technology Step 2: Open Device Spy 2. Login Page: Users can login into the SAT>IP switch/server by using a specific local IP address. Go to the first section to learn how to find the local IP address. By using browsers, users are able to see a login page, which requires password. The system default password is: satip_admin.
4. Network Setting: • Network Interface: The default network interface of the SAT>IP switch/server is utilizing Ethernet network. Users do not need to adjust the setting if the SAT>IP switch/server is installed in the Ethernet environment. • IP Settings: Automatic or Static mode can be chosen by users in the function. The default IP setting is automatic mode. The SAT>IP switch/server does not include DHCP function, so it needs to be connected to a router or switch with DHCP function.
6. LNB Settings: The SAT>IP switch/server supports Quad, Quattro, and Uni-cable LNB (Universal). Users do not need to adjust the settings if they are using Quad and Quattro LNB (Universal). In certain regions or countries, frequencies of LNBs may be different. Users can adjust the settings based on different frequencies in different regions or countries. 7. Diagnostic: Tuners of the SAT>IP switch/server can support two different modes: Dynamic or Static mode.
Static Mode After clicking Apply button, signal lock status, signal strength and quality will be seen. With the signal lock status, you can find out if above setting is not correct or there is something wrong in environment setup. Please note that the Static mode must assign required PIDs First, you can see Tuner 1, 2, 3, 4 settings in the information, and you can choose any tuner out of those 4 tuners to change to the static mode.
8. System Status: (1) Tuner (all four tuners) and Streaming Status can be monitored in the function. Moreover, system status can help on the debug/clarification once an issue occurs. With this information, you can make sure the required signal is locked with correct setting in a correct environment, and also the connection status with a SAT>IP client. 9. UPnP Settings: The UPnP device name can be changed by using the function. It will be showed on client devices: 10.
Specifications Export: The function helps users store all settings in the system, and it also helps on the debug/ clarification once an issue occurs in the field. For installation companies, they can adjust settings in their labs and then send the XML file to end users. The name of export file will be “satip_settings”.
Status: v1.