User manual

ENGLISH ENGLISH

Static Mode

First, you can see Tuner 1, 2, 3, 4 settings in the information, and you can choose any

tuner out of those 4 tuners to change to the static mode. After choosing static mode,

you can see frequency, symbol rate, polarization, multicast address, Pid list, and LNA:

• Frequency: Frequency (MHz) of the transponders will be received by SAT>IP

switch/server.

• Symbol Rate: Symbol rate (Ksym/s) of the transponders will be received by SAT>IP

switch/server

• Polarisation: Polarisation of the transponders will be received by SAT>IP switch/

server

• Multicast Address: it indicates the address of multicast streams.

• Pid List: user has to input PAT, PMT, Video PID, Audio PID, EIT, NIT, and ETC. In order

to see the program, user has to input at least PAT, PMT, Video PID, and Audio PID.

• LNA: it ampliﬁes strength of signal, and it is recommended to use default setting.

After clicking Apply button, signal lock status, signal strength and quality will be seen.

With the signal lock status, you can ﬁnd out if above setting is not correct or there is

something wrong in environment setup. Please note that the Static mode must assign

required PIDs