Operation Manual

Power
supply
TV
AC/DC adapter
12V 150mA
Powered from
AC/DC power adaptor
Gain
adjuster
Power
supply
TV
DC 12V
+ -
Powered from
DC battery
Gain
adjuster
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
STEP 5. Connect the antenna cable
Connect the antenna coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11
Figur e 11
Figur e 12
Figur e 13
STEP 6: Connect power supply MP-001 kits
Option 1: Power from AC/DC power adapter. See Figure 12.
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the AC/DC adapter to the 12V DC jack on the power supply unit, and plug the adapter into the power socket.
4.Adjust the gain in power supply unit for best signal reception
Option 2: Power from DC battery. See Figure 13
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the DC 12V input wires to the 12V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.
5.Adjust the gain in power supply unit for best signal reception.
Power
supply
TV
AC/DC adapter
12V 150mA
Powered from
AC/DC power adaptor
Gain
adjuster
Power
supply
TV
DC 12V
+ -
Powered from
DC battery
Gain
adjuster
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
STEP 5. Connect the antenna cable
Connect the antenna coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11
Figur e 11
Figur e 12
Figur e 13
STEP 6: Connect power supply MP-001 kits
Option 1: Power from AC/DC power adapter. See Figure 12.
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the AC/DC adapter to the 12V DC jack on the power supply unit, and plug the adapter into the power socket.
4.Adjust the gain in power supply unit for best signal reception
Option 2: Power from DC battery. See Figure 13
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the DC 12V input wires to the 12V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.
5.Adjust the gain in power supply unit for best signal reception.
Power
supply
TV
AC/DC adapter
12V 150mA
Powered from
AC/DC power adaptor
Gain
adjuster
Power
supply
TV
DC 12V
+ -
Powered from
DC battery
Gain
adjuster
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
STEP 5. Connect the antenna cable
Connect the antenna coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11
Figur e 11
Figur e 12
Figur e 13
STEP 6: Connect power supply MP-001 kits
Option 1: Power from AC/DC power adapter. See Figure 12.
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the AC/DC adapter to the 12V DC jack on the power supply unit, and plug the adapter into the power socket.
4.Adjust the gain in power supply unit for best signal reception
Option 2: Power from DC battery. See Figure 13
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the DC 12V input wires to the 12V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.
5.Adjust the gain in power supply unit for best signal reception.