User manual

1. Turn off the antenna and disconnect power to all wired components.
2. Using the screwdriver, remove the screws securing the radome. Then remove
and set it aside in a safe place.
Figure A-2 The Back of the Reflector
4. Loosen the four screws fastening the LNB.
5. Adjust the LNB clockwise or counter-clockwise, until the skew arrow on the
LNB points to the skew angle that you determined earlier.
Caution
Be sure to keep the LNB fully
inserted into the hall to ensure
the optimum performance.
Figure A-3 LNB Skew Angle Adjustment
6
. Tighten the four screws.
7. Reinstall the radome.
LNB
LNB Center Line
(+) Direction
(
-
) Direction