Specification

Coefficient Of Friction (COF):
COF defines the relative slip resistance of floor surfaces. The tile industry uses ASTM C1028-06 to
measure the COF. The procedure involves the use of a calibrated dynamometer, a specified Neolite heel
assembly, a standard reference tile surface, and a 50 pound weight. This procedure measures the
maximum force required to initiate motion in the testing assembly in four perpendicular directions. The
values are recorded and an averaging calculation is performed that determines the static COF.
Water absorption, ASTM C373-88:
Water absorption is measured using ASTM C373-88. Individual tiles are weighed, saturated with water,
then weighed again. The percent difference between the two conditions is referred to as the water
absorption value. Tiles are classified according to water absorption percentages as follows:
Impervious: Tiles exhibiting 0.5% or less.
Vitreous: Tiles exhibiting more than 0.5% but not more than 3.0%.
Semi-vitreous: Tiles exhibiting more than 3.0% but not more than 7.0%.
Non-vitreous: Tiles exhibiting more than 7.0%.
Abrasion Resistance (P.E.I.):
The following list describes the glazing strength of each category and its application as it appears under
the P.E.I.
P.E.I. 1: (Light Residential)
Light Traffic - Residential floor coverings in areas subject to soft-soled footwear or normal footwear
traffic, without scratching dirt (i.e. domestic bathrooms and bedrooms without exterior access).
P.E.I. 2: (Residential)
Medium to Light Traffic - Residential floor coverings in areas subject to soft-soled footwear or normal
footwear traffic with small amounts of scratching dirt (i.e. rooms in the living areas of homes except
kitchens, entrances and other areas that may be subjected to high usage).
P.E.I. 3: (Heavy Residential or Light Commercial)
Medium to Heavy Traffic - Residential or light commercial may withstand normal footwear and regular
traffic, with some dirt and/or other abrasives present in limited quantities. Tile in this class may be used
in light commercial installations with limited foot traffic and with no direct access to the outside.
Examples may include residential kitchens and hallways with limited traffic from the outside.
P.E.I. 4: (Commercial)
Heavy Traffic - Residential and commercial floor coverings subjected to considerable traffic and
scratching dirt (i.e. entrances, workrooms, inns, exhibition halls, and sales rooms, as well as other rooms
in public and private buildings). Floors should be adequately protected against scratching dirt at the
entrances to buildings by either floor mats or some other footwear cleaning device.