User manual

220-240V~
Input voltage
Single Type Connection
Parallel Type Connection
220-240V~
Input voltage
F28100RC-d
Instruction Manual
Integrated LED Downlight - Siena
CAUTIONS
Installation or replacement should be performed only by licensed and qualified
electricians.
DO NOT disassemble the luminaire. Doing so may result in lamp damage or
malfunction.
Switch off the power source before installation, replacement and cleaning.
Wearing gloves during installation is recommended to ensure the luminaire is kept
in the best condition.
Before replacement of the luminaire, turn it off and allow it to cool down. Heat-
Read the entire manual carefully before installation and operation.
The F28100RC-d is capable of linear dimming from 100% to 10% when working with
most conventional dimmers for incandescent lamps or halogens. Please visit
www.zenialighting.com/download.html for the list of compatible dimmers.
The minimum safety distance from the illuminated object is 0.1m.
The manufacturer accepts no liability for any damage resulting from the misuse
of the luminaire or from when it is used with inappropriate equipment.
Consult your dealer if you have any enquiries.
resistant gloves are mandatory when handling the luminaire.
ATTENTION
Designed for indoor application and recessed ceiling installation.
Instant start is allowed.
Installation
Safety Distance:
W W
H
Cut-Out Ø:
Max.
25mm
Model No. W (mm) H
F28100RC-d
(mm)
Model No. Cut-Out (mm)
F28100RC-d 68
0.1m
---
MM Code MT76720 MT76722
Model Number F28100RC-d WH26 F28100RC-d NI53
Wattage 8W 8W
Voltage 220-240V~ 220-240V~
Frequency 50/60Hz 50/60Hz
Dimmable Yes Yes
TECHNICAL SPECIFICATION
Suggested Connection Box
Model Number
LA2501
LA2504 LA5111
Connection
Type
Parallel type
(Short version)
Single screw type
(Long version)
Single parallel
push-in type
2-way 2-way 3-way
LA5113
Single screw
type
3-way
Power Cord Preparation (for 2-way single screw type):
TYPE OF CONNECTION
60
80
Input voltage
220-240V~
Single Type Connection
NL
6.5mm
5.5mm
Power Cord Preparation:
0.5-1.5mm
2
For solid conductors
0.5-1.5mm
2
For tinned wire ends
max. 1.5mm
For wire ends with ferrule
1mm
Power Cord Preparation:
6.5mm
5.5mm
NL
Single Type Connection
Parallel Type Connection
Input voltage
220-240V~
Input voltage
220-240V~
• The operating temperature of the luminaire is -30°C to +40°C.
Power Cord Preparation (for 3-way single screw type):
Power Cord Preparation:
6mm
18-26mm
L
N
Press downwards to secure
220-240V~
Single Type Connection
Input voltage
connection wire
GB
0.75-2.5mm
2
For solid conductors
0.75-2.5mm
2
For tinned wire ends
max. 1.8mm
For wire ends with ferrule
1mm
Power Cord Preparation:
11-12mm
18-23mm
Press downwards to secure
connection wire
Power Cord Preparation (for 2-way parallel type):
Power Cord Preparation (for 3-way single parallel push-in type):
Must not exceed 15PCES.
IP Rating
8010G0044A
MEGATRON
MEGATRON
IP20
IP23
IP20
IP23
IP20
IP23
IP20
IP23
Correct disposal of This Product
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe
recycling.
IDV GmbH
Birkenweiherstr. 2
D-63505 Langenselbold
Germany
www.megatron-licht.eu
Must not exceed 15PCES.
: :
: BLACK : I:\3.artwork\film\manual\megaman-europe\
english standard version
: A4
: cherlny
:
: MEGAMAN
BLACK
80克胶版纸
MEG AMAM
: F28100RC/F28100RC-d
801 0 G 0 0 4 4 A
2014-07-09

Summary of content (1 pages)