MEGAVISION SYSTEM. Inc 3003 MOTH FIRST STREET SUIT #331 SAN JOSE, CA 95134 TEL : 408-432-5052 FAX : 408-232-5440 TOLL FREE : 080-854-5447 e-mail : techsupport@megavisionsys.com www.megavisionsys.
TABLE OF CONTENTS FCC COMPLIANCE STATEMENT NOTE ADJUSTING YOUR LCD MONITOR • General safety precautions 4 ………………………………… 7 ……………………………………………… 8 • Connecting your monitor • User controls -------------- ………………….…………… • Unpacking your monitor • Viewing angle 3 ………………………………… 9 ……………………………………………… 10 • OSD Functions and adjustments ……………….…..……… 11 • Menu adjustments …………………………….…..……… 12 • Refining the picture APPENDIX - ………………………….…..
FCC COMPLIANCE STATEMENT * NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
General safety precautions This Monitor has been engineered and manufactured to assure your safety. Please read this manual and comply with the warnings and the procedures to avoid any serious electrical shock and other serious damage. 1. Do not place anything heavy, wet or magnetic on the monitor or power cord. Do not cover the ventilation openings nor touch them with metallic or flammable material. 2. High temperature can cause troubles.
. 6. 7. 8. 5 Place the monitor on a flat surface to prevent it from falling. Do not apply any mechanical shocks to the machine. Install it in a well-ventilated area or secure enough space for ventilation. Turn the monitor off before connecting it to the power outlet.
9. Make sure that the power cord and the other cords are properly connected. 10.Overloaded AC outlets and extension cords are dangerous. Also, the frayed power cords and the broken plugs may cause electric shock or fire. 11.Do not open the monitor. There are no user-serviceable components inside. There is a risk of exposure to high-voltage electricity inside, even when power is turned off. If the display monitor does not operate properly, unplug the power cord and contact your dealer.
Unpacking your monitor Please make sure the following items are included with your monitor. If you find that any of these items are missing or appear damaged, contact your dealer immediately. The power cord can be different depending upon different voltage areas.
Viewing angle Your monitor was designed to allow you to adjust it to a comfortable viewing angle. The viewing angle can be adjusted 5° to 30° forward and backward respectively as indicated by the arrow marks below.
Connecting your monitor Be sure to turn the computer off before connecting the monitor g Connect the video signal cable (15Pin connector) to the system’s 15 pin D-sub connector which is located on the back panel of the computer. g Connect the power adaptor cord to the monitor and then to the power supply. g After powering on the computer, adjust the display using the various controls provided.
User controls Front control buttons LED MENU ADJUST DOWN UP SELECT POWER No. Key name 1 MENU 2 ADJUST Activates the auto adjustment function. 3 SELECT Selects the main menu items and submenu items. 4 ▲ 5 ▼ 6 POWER 7 10 LED Description Opens the OSD menu. Moves to the upper menu item or submenu item. Increases the value of the parameter. Moves to the lower menu item or submenu item. Decreases the value of the parameter. Turns on/off the monitor. Indicates the status of the monitor.
OSD Function and adjustment Main menu and control selection Press the MENU key to access the main menu. The resolution and frequency are displayed at the bottom of the menu box. Place the color box on the control icon you wish to adjust by pressing using the ▼ or ▲ key. Press the SELECT key to access the control. Exit menu Press the MENU key to exit the OSD screen. Auto exit The OSD menu will disappear automatically after a few second of inactivity.
Menu adjustments Icon Settings and sub-menus BRIGHTNESS 12 Description • Adjusts the screen intensity. CONTRAST • Adjusts the contrast of the screen image. AUTO-ADJUST • Adjusts(automatically) the image position, the clock and the phase settings.
Icon Settings and sub-menus Description • Adjusts the horizontal and vertical POSITION position of the screen image. • Displays the color control COLOR LANGUAGE menu. • Selects from five languages. • Displays the OSD position adjustment OSD ADJUST for the OSD menu. Selects the OSD display timing. INFORMATION • Information of input timing. • Exits from menus and subEXIT 13 menus.
Refining the picture At first display, a full screen, such as window background or Step 1 "H" character should be achieved by using editor (eq ; notepad). Adjust the screen to the center of the display (LCD), by using the top and bottom display controls (i.e. using Vertical position menu). Step 2 Adjust the screen to the center of the display (LCD) by using the right and left display controls (i.e. using Horizontal position menu). Step 3 Adjust the phase until the "H" character displays clear.
Using the Contrast, Brightness, set the color to your Step 5 preference. When you finish the adjustment, you can save your settings Step 6 by pressing on the menu until the OSD screen has disappeared. Power management function This monitor is equipped with a DPMS(Display Power Management Signaling) function that automatically cuts the power dissipation down to less than 5W when the computer is left unattended.
Video input terminal A 15Pin D-Sub connector is used as the input signal connector. Each pin and assignment is shown in the table below. Pin No. 1 Signal Name RED Pin No. 2 GREEN 10 GROUND 3 BLUE 11 GROUND 4 GROUND 12 DDC SDA 5 GROUND 13 H-Sync 6 RED Ground 14 V-Sync 15 DDC SCL 9 GREEN 7 8 Ground Signal Name N.C. BLUE Ground 15Pin D-Sub connector Display modes For the display modes listed below, the screen image has been optimized during production.
Preset timing modes. Mode Display Mode 640 x 350 720 x 400 VGA 640 x 480 640 x 480 640 x 480 800 x 600 800 x SVGA 600 800 x 600 1024 x 768 1024 x XGA 768 1024 x 768 17 Horizontal Frequency (KHz) Vertical Frequency (Hz) Standard Type 31.5KHz 70Hz IBM 31.5KHz 70Hz IBM 31.5KHz 60Hz 37.9KHz 72Hz 37.5KHz 75Hz 37.9KHz 60Hz 48.1KHz 72Hz 46.9KHz 75Hz 48.4KHz 60Hz 56.5KHz 70Hz 60.
Troubleshooting Warning : This section will try to anticipate potential problems that you may encounter in the day-to-day use of your monitor. If after trying the suggested solutions, your monitor’s symptom remains the same, contact your authorized service center. Troubleshooting problems Problems LED ON No Picture LED OFF LED Blinking Display is not clear Too light or too dark 18 Corrective Actions • Using OSD, adjust Brightness and Contrast to maximum or reset to their default settings.
Problems Picture is fuzzy Picture bounces or has wavy oscillations Picture appears to be ghosting Corrective Actions • Perform Auto adjustment. • Check the signal cable connection between computer and monitor. • Check the signal cable connection between computer and monitor. • Adjust the color settings using the Color is not uniform The colors are distorted with dark or shadowed areas color menu. • Adjust the color settings using the color menu.
Option Pivot function Winportrait installation instruction, WINDOWS 95/98/NT 4.0 1. Quit all the application programs you running. 2. Make sure your graphics card Manufacturer’s (native) drivers are installed before installing Winportrait software. 3. Insert the pivot CD-ROM into the drive and select RUN from the START button. 4. Type D:\SETUP.EXE (replace D: with the letter of your CDROM drive if necessary). 5. After reading the license agreement, click agree to install. 6.
Specifications LC Type D Pixel vie pitch wa ble size • 14.1” viewable diagonal TFT type • 0.297(H) x 0.297(V)mm Glass • Anti-Glare, Hard Coating surface Viewable angle • L/R : 40°, U/D : 15°/ 30° Contrast ratio • 250:1 (typical) Brightness • 150 cd/m2(max) Resolution • 1024 x 768 Displayable color • 262.
• Input : Universal AC100 ~ 240V AC/DC Adapter • Output : DC 12V • FCC, cUL Active area • 285.7mm(H) x 214.3mm(V) Dimensions • (Physical) Weight 22 380mm(W) 150mm(D) • 4.
