REV.
Table of Contents ENG Please read the cautions carefully before using this product 2 Product features 3 Installation of the product 4 Names and operation of control buttons 6 Cable Connection 8 Selection and operation of the OSD menu 9 MENU Function 10 Explanation of message for utilization 12 Timing guide 13 Product specifications 15 Troubleshooting 16
ENG Please read the cautions carefully before using this product Do not scratch the screen of the LCD monitor with sharp materials such as nails and pens. The interior part of the monitor is composed of electric elements. If the monitor is broken, do not try to disassemble it, because it is necessary to contact appropriate technical services in order to have the product repaired. Take care of the LCD monitor so that it is not damaged by the external impact.
Product features ENG Introduction Thank you for buying our TFT LCD monitor. Our monitor is a high-resolution monitor that has features of electromagnetic wave blocking, reduction in electricity consumption, and efficient use of space. In view of the fact that this user's manual is prepared for helping you toadequately use the product, it is recommendable to read the user's manualbefore using the product.
ENG Installation of the product Checking the product Please check if the product contains the following items. If there are items missing, please contact the technical services. 1. TFT LCD monitor 2. User's manual (including product warranty). 3. AC to DC adapter. 4. Power cable (the power cable can be different according to use environment). 5. Signal Cable ( Monitor Connection Cable ) 6. Monitor Base 7. Audio cable How to connect monitor stand base How to install the monitor stand 1.
Installation of the product ENG Caution Adjusting LCD panel angle - Do not hold or press down on the monitor’s screen while adjusting angle since LCD panel maybe damaged or break if severe. - Do not lean backward excessively so that the monitor does not fall backwards. - Be careful of potential damage to the stand while adjusting angle.
ENG Names and operation of control buttons Function of the buttons If you press the power button, the indicator lamp is turned on, and the operation of the monitor is initiated. If you do not want to start the operation of the monitor, press the power button again. Power indicator lamp (green) This product offers power-saving function. Power indicator lamp shows the current state of power. Power indicator lamp flashes during the following situations. MENU Shows menu screen or makes it disappear.
Names and operation of control buttons ENG Auto Brightness Control The product offers built-in function that automatically adjusts to optimized brightness depending on the brightness of the area at the vicinity. (At the time of purchase, this is set as On.) * Refer to the screen category of the MENU function for detailed method of use.
ENG Cable Connection 8
Selection and operation of the OSD menu ENG You can select the OSD menu in the OSD window using all the control buttons at the bottom of the screen. To change the current settings or adjust them for the desired settings, follow the following steps. MENU / SELECT (Open menu screen ) (move to main category) (select main category ) SELECT / MENU (Close menu screen) (save set value) (adjust set value) / (move to sub category ) SELECT (select sub category) 1.
MENU Function ENG Screen Screen Automatic brightness Brightness adjustment Horizontal location Vertical location Modulation Frequency Automatic screen adjustment OFF NO Automatic brightness: Turns automatic brightness function On/Off Brightness adjustment: Adjusts standard value for automatic brightness function (0-100) Horizontal location: Adjusts horizontal location on screen .(0-100) Vertical location: Adjusts vertical location on screen \.(0-100) Modulation: Adjusts focus on the screen.
MENU Function ENG OSD OSD OSD Horizontal Adjustment OSD Vertical Adjustment OSD Marking Time Transparency OSD Horizontal Adjustment: Adjusts OSD menu screen’s horizontal location.(0-100) OSD Vertical Adjustment: Adjusts OSD menu screen’s vertical location. (0-100) OSD Marking Time: Adjusts OSD menu screen’s marking time within the screen Possible to set the time for disappearance of OSD menu screen up to 40 seconds when OSD operation button is not pushed on.
ENG Explanation of message for utilization Auto Screen Adjustment Auto Screen Adjustment Appears when automatic screen adjustment is executed on RGB mode. Automatic Brightness Adjustment Automatic Brightness Adjustment Appears when automatic color Adjustment is executed on RGB mode. Auto Brightness Appears when automatic brightness function is executed. No input signal No input Signal Appears when there is no PC input signal Check cable connection .
Timing guide ENG Timing guide This product is a multi-frequency monitor. It functions in horizontal frequencies from 30 kHz to 80 kHz and vertical frequencies from 56 Hz to 75 Hz. Due to its design based on microprocessor, it offers the functions of automatic synchronization and automatic size. This monitor is equipped with 10 programmed configurations that are shown in the timing table. The followings are the ten configurations. Resolution Polarity (H/V) 70Hz 28.322 -/+ 60Hz 25.175 -/- 37.
ENG Timing guide In case of DVI terminal 14 PIN SIGNAL PIN SIGNAL PIN SIGNAL 1 T.M.D.S DATA 2- 9 T.M.D.S Data 1- 17 T.M.D.S Data 0- 2 T.M.D.S DATA 2+ 10 T.M.D.S Data 1+ 18 T.M.D.S Data 0+ 3 T.M.D.S Data 2/4 Shield 11 T.M.D.S Data 1/3 Shield 19 T.M.D.S Data 0/5 Shield 4 T.M.D.S Data 4- 12 T.M.D.S Data 3- 20 T.M.D.S Data 5- 5 T.M.D.S Data 4+ 13 T.M.D.S Data 3+ 21 T.M.D.S Data 5+ 6 DDC Clock 14 +5V Power 22 T.M.D.S Clock Shield 7 DDC Data 15 Ground 23 T.M.D.
Product specifications ENG Product specifications Type LCD Pixel Pitch Surface Color 19” diagonal viewable screen TFT (Thin Film Transistor). Active Matrix Panel 0.294mm(H) x 0.294mm(V).
ENG Troubleshooting No power. - Flip the power switch ON. The Power LED turns on. - Make sure AC power cord is securely connected to the power jack and to a power outlet. Power on but no screen image. - Make sure the video cable attached with this monitor is tightly secured to the video output port on the back of the computer - Adjust the brightness and contrast. Image is unstable, unfocused. - Use AUTO-TUNE to adjust automatically.
Troubleshooting ENG Control buttons do not work. - Press only one button at a time. ABOUT THE LCD The LCD contains over 3,932,160 thin-film transistors (TFTs). A small number of missing, discolored, or lighted dots on the screen is an intrinsic characteristic of TFT LCD technology and is not an LCD defect. If you display a fixed pattern for more than 10 hours, its image may remain on the screen in overlap mode when you display something else.
FCC NOTE :This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
