USER MANUAL Portable EV Charger Product images are for illustrative purposes only and may differ from the actual product.
Contents Troubleshooting 2 DIAGNOSTIC SUGGESTION 3 Have power, no connection Connect the electric vehicle Connection, no charging Start charging Charging Keep the unit away from water Finished Charging Un-plug the power and take good care of the unit Communication Fault Check the car side whether it is connected Overload Protection Check circuit and socket;Un-plug & re-plug the charger 10 Abnormal Current (SCP) Check circuit and socket;Un-plug & re-p
Specification Product Descpritions Electrical Characteristics Specifications Model 8A Type 16A Type Max AC Charging Current 8A 16A Circuit Breaker Requirements ≥10A ≥18A Over Current Protection >10A >18A Input Voltage 100-245 Vac Single Phase Working Frequency 50Hz/60Hz Operating Temperature -30°C to +50°C Stand by Power <2W Input Power Consumption (While charging) <7W Over Voltage Protection > AC 265V Under Voltage Protection
Warning Grounding Abnormal Do not install or use the charger near flammable,explosive,harsh, or com bustible materials,chemicals,or vapors. Turn off input power at the circuit breaker before cleaning the charger. Use the charger only within the specified operating parameters. Do not attempt to open, disassemble, repair, tamper with, or modify the charger. The charger is not user serviceable.
Caution LED Display Status Do not operate the charger in temperatures outside its operating range of -22°F (-30°C) to 122°F (50°C). EV Charging / Control Box Ensure that the charge cable is positioned so it will not be stepped on, tripped over, or subjected to damage or stress.
How to Start/Stop Charging 1.Firmly insert the power plug into the outlet. 5.Press the button and pull the EV charging connector out of the vehicle. 6.Close the cap of the vehicle and then place back the cap of the EV charging connector. When ground fault is detected, the red indicator light will flash. The charging function will still work. （Fig.5） （Fig.6） （Fig.1） 2.Take off the cap and then insert the EV charging connector into your vehicle. 7.Put the portable EV charger into the box. （Fig.2） 3.
