User Guide

1 10
2

3

4


6

7

9

8

10

10
Thanks for purchasing and using our portable ev charger.In
order to help you properly use this product,please read this
user manual carefully before charging.
Contents
Connect the electric vehicle
SUGGESTION
Have power, no connection
Start charging
Connection, no charging
Keep the unit away from waterCharging
Un-plug the power and take good care
of the unit
Finished Charging
Check the car side whether it is
connected
Communication Fault
Check circuit and socket;Un-plug &
re-plug the charger
Overload Protection
Check circuit and socket;Un-plug &
re-plug the charger
Abnormal Current (SCP)
Check circuit and socket;Un-plug &
re-plug the charger
Leakage Protection
Check circuit and socket;Un-plug &
re-plug the charger
Overvoltage/Undervoltage
Protection
To restart, un-plug for a time then
re-plug the charger
Unit Overheating Protection
DIAGNOSTIC
The SAE J1772 / IEC 62196 AC EVSE Portable Electric Vehicle Charger must
be stored in a clean and dry location,and it must be located away from any high
heat sources. Avoid oily or corrosive substances from contacting the ev charger
or the power cords and plugs/connectors between uses. Avoid any fall or drop
that can lead to impacts between a hard surface and the ev charger. Make sure
there is no contact of any sharp object with the ev charger or the power cords or
plugs/connector. Do not store the ev charger in a location where rodents have
access, such as an exterior shed.
Troubleshooting
Storage