SDS

Meguiar's Ultimate Leather Detailer G201316 09/03/19
__________________________________________________________________________________________
Page 5 of 11
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
Physical state
Color
Liquid
Off-White
Odor
Pina colada
Odor threshold
No Data Available
pH
9 - 10
Melting point
No Data Available
Boiling Point
212 ºF
Boiling Point
No Data Available
Flash Point
>=200 ºF [Test Method:Closed Cup]
Evaporation rate
No Data Available
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
No Data Available
Flammable Limits(LEL)
No Data Available
Flammable Limits(UEL)
No Data Available
Flammable Limits(UEL)
No Data Available
Vapor Pressure
No Data Available
Vapor Pressure
No Data Available
Vapor Density
No Data Available
Vapor Density
No Data Available
Density
0.975 - 1 g/cm3 [Ref Std:WATER=1]
Specific Gravity
0.975 - 1 [Ref Std:WATER=1]
Solubility In Water
No Data Available
Solubility in Water
No Data Available
Solubility- non-water
No Data Available
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
1,000 - 3,000 centipoise [Test Method:Brookfield]
[Details:Brookfield #2 @ 10rpm]
Average particle size
No Data Available
Bulk density
No Data Available
Hazardous Air Pollutants
No Data Available
Molecular weight
No Data Available
Volatile Organic Compounds
2.8 % weight [Test Method:calculated per CARB title 2]
Percent volatile
92.8 % weight [Test Method:Estimated]
Percent volatile
No Data Available
Softening point
No Data Available
VOC Less H2O & Exempt Solvents
520 g/l [Test Method:calculated SCAQMD rule 443.1]
* The values noted with an asterisk (*) in the above table are representative values based on testing of raw materials and selected products.
Additionally, a material's characteristics may change depending upon the process and conditions of use at a facility, including further
changes in particle size, or mixture with other materials. In order to obtain specific data for the material, we recommend the user conduct
characterization testing based on the use factors at the specific facility.
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.10.2.