User's Manual
Table Of Contents
4) USB C to C 2.0 cable
Material:PVC
length:1M
OD:3.0
Data transfer speed:480Mbps
Use steps:
1. Connect the USB TYPE C cable between the wireless charging dock and Type
c wall charger ,plug in the type c wall charger,the led light shows Red.
And put the wireless power bank on the charging dock,the led light shows Red
2. To set up the clock,
A. Press and hold the left button "M" for 3 seconds until the clock hour unit
flashes and then press "-" "+" to adjust the hour duration.
B. Press and hold the left button "M" for 3 seconds until the clock hour unit
flashes, then press "M" once to adjust the minutes and press "M" once to
confirm.
3. Put the your device in the charging area, try put it near the charging centre
as close as possible
4. Put the your device(with wireless receiving board)on the wireless charger
(shows Red light),
5. The receiving device is removed from wall charger(shows flash light)
Light status:
1. Power on:Red light