CV-57G HDMI 1.
Safety and Notice The CV-57G HDMI 1.3 over Single CAT5 Extender has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the CV-57G should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. Follow all instructions and warnings marked on this unit.
Features State-of-the-art Silicon Image (founder of HDMI) chipset embedded for upmost compatibility and reliability HDMI 1.
Specifications & Package Contents Model Name Technical Role of usage HDMI compliance HDCP compliance Video bandwidth Video support Transmission (8 bit) Audio support Equalization Input TMDS signal Input DDC signal ESD protection PCB stack-up Input Output CV-57G CV-57G-RX aka CV-715 CV-57C-TX CV-57C-RX CV-57B-TX CV-57B-RX aka CV-715 Transmitter [TX] Receiver [RX] Transmitter [TX] Receiver [RX] Transmitter [TX] Receiver [RX] HDMI 1.
Panel Descriptions Front View — Transmitting Unit Mode CV-57G-TX HDMI-IN HDMI-IN: Connect to a HDMI source with a HDMI M-M cable here Mode: 0 = HDMI mode with surround sound audio output 1 = HDMI mode with stereo audio output 2 = DVI mode 3~5 = Reserved 6 = Use default EDID* 7 = Learn EDID from the display Note for EDID (Extended Display Identification Data) learning 1.
Front View — Receiving Unit CV-57G-RX EQ HDMI-OUT HDMI-OUT: Connect to a HDMI display with a HDMI M-M cable here. EQ: Adjust the 8-level equalization control knob to the received HDMI signals. 0 – 7 = strongest – weakest. It is recommended to switch from 7 to 0 to find the optimal visual experience. Rear View — Receiving Unit CV-57G-RX +5V DC RJ45-IN RJ45-IN: Plug in a CAT-5/5e/6 cable that needs to be linked to the RJ-45 connector of the transmitting unit CV-57G-TX.
EDID Learning 1. Turn on CV-57G-TX. 2. Turn the Mode of CV-57G-TX counterclockwise from 0 (for surround sound) or 1 (for stereo) to 7. 3. Use a HDMI cable to connect CV-57G-TX & the display (better not connect to video source). The LED on the RJ-45 of CV-57G-TX will dim and light again, which indicates the EDID learning process is finished. 4. Turn the Mode of CV-57G-TX clockwise from 7 to 0 (for surround sound) or 1 (for stereo).
Performance Guide for HDMI over LAN Cable Transmission Performance rating Wiring Shielding Unshielded (UTP) Solid Shielded (STP) Unshielded (UTP) Stranded Shielded (STP) Termination Type of LAN cable CAT5 CAT5e CAT6 Please use EIA/TIA-568-B termination (T568B) at any time Limited Warranty The SELLER warrants the CV-57G HDMI 1.
