Specifications

4. Connect a device equipped S-Video & CVBS through S-Video & CVBS breakout cable.
5. Connect a device equipped with DVI output (such as PC) to the DVI connector of the breakout cable.
6. Connect a device equipped with component video output (YPbPr such as DVD player or camera) to the 3-RCA
jack of the VYPBA01.
7. Connect a device equipped with VGA output (such as laptop) to the VGA connector of MX-1004PF.
8. Connect a device equipped with composite video output to composite input of the MX-1004PF.
9. Connect your computer with the MX-1004PF by a 9-pin RS-232 cable and then install the software.
10. Plug in AD power cord into AC power socket.
11. Execute the control software and establish the connection between PC/Laptop and MX-1004PF.
12. For detailed software control operation, please refer to the software instruction section.
Component video
YPbPr
DVI
S-Video/CVBS/HDMI
Connect to
RS-232
DVI/HDMI
Figure 3: Connection Diagram
DVI or VGA Display
Software control
VGA
DVI / VGA / YPbPrS-Video / CVBS DVI / VGA / YPbPrS-Video / CVBS
INPUT
1.
INPUT
2.
INPUT
4.
INPUT
3.
DVI / VGA / YPbPrS-Video / CVBS DVI / VGA / YPbPr DVIVGA S-Video / CVBS
OUTPUT
RS-485Device IDFirmware UpdateRS-232 RS-485 Factory Reset
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
100V- to 240V-
AC 50-60Hz