Specifications

InputsandOutputs
The MX-1004PF has 16 inputs and accepts both graphics and video signals, which come from computers (DVI or
VGA), composite, and component video sources respectively. You can pick up four of the ten inputs and then
display four of them simultaneously on the same screen. Figure 2 shows the rear panel connectors of a
MX-1004PF and Table 1 illustrates how you can connect video devices and display to the MX-1004PF.
Figure 2: Rear Panel
*Default:TurnontheMX‐1004PFthenswitchthecircledDIPswitchesimultaneouslyupanddown
tofactorydefaultmode.

*These IO ports support various resolution from 640x480 up to 1920x1200, for more detail of
thesupportedmodes,pleaserefertotheAppendix–SupportedResolution.
Table 1: Input/Output Connectors
Input Connector Video Source
DVI-x
YPbPr-x/VGA-x
CVBS-x
S-Video-x
[x = 1~4]
[1] DVI
[2] VGA — with a DVI-to-VGA adapter (DVA01)
[3] Component (YPbPr)
—
with a DVI-to-VGA adapter (DVA01) and a VGA-to-component
breakout cable (VYPBA01)
[4] CVBS
[5] S-Video
Output Connecto
r
Display
DVI-I OUT
[1] DVI display
[2] VGA display — with a DVI-to-VGA adapter (DVA01)
[3] 1x DVI display + 1x VGA display
—
with a DVI to DVI&VGA breakout cable (DDVY01)