User manual

Problem Recommendations
No power
9 Check if you correctly and firmly plug AC power core into MX-1004.
9 If you are recovering from power outage, accidentally unplug the power
core or other power surge conditions, leave the device off for a while
and then power it on again.
No/ Erratic video
9 Make sure all cables are in good working condition and properly
connected to the MX-1004 and displays.
9 Configure the output video resolution so that it doesn’t excess the
native resolution of the display. ( in this case, the message of “out of
range” is usually showed on your screen)
9 Make sure video sources are accurately selected to the right channels.
Poor quality
9 We suggest that don’t use T-connectors to split your video source into
to images displayed on two different screens. That will lower output
video quality. Use a distribution amplifier instead of T-connectors.
9 Make sure the video source is not compressed and maintains the
highest native resolution.
Wrong color
9 Use color balance or auto configuration.
Auto color configuration only works at VGA and component
inputs.
Troubleshooting
Page 15 of 18