Product Info
MeiG Smart product technical information
SLM500 Hardware Design Guide Page 64
LTE B1
2110~2170 MHz
1920~1980 MHz
TX: 18000~18599
RX: 0~599
LTE B3
1805~1880 MHz
1710~1785 MHz
TX: 19200~19949
RX: 1200~1949
LTE B5
869~894MHz
824~849MHz
TX: 20400~20649
RX: 2400~2649
LTE B8
925~960MHz
880~915MHz
TX: 21450~21799
RX: 3450~3799
LTE B34
2010~2025 MHz
2010~2025 MHz
36200~36349
LTE B38
2570~2620 MHz
2570~2620 MHz
37750~38249
LTE B39
1880~1920 MHz
1880~1920 MHz
38250~38649
LTE B40
2300~2400 MHz
2300~2400 MHz
38650~39649
LTE B41
2496~2690 MHz
2496~2690 MHz
39650~41589
Note: The SLM500Q's LTE TDD B41 band bandwidth is 100MHz (2555 ~ 2655 MHz), the
channel is 40240 ~ 41240.
6.11 RF Characteristics
The following table lists the conducted RF output power of the module, in accordance with
3GPP TS 05.05 technical specification, 3GPP TS 134121-1 standard.
Table 6.10: Conducted Output Power
Frequency band
Standard output power
(dBm)
Output power tolerance (dBm)
GSM850、EGSM900
33dBm
±2
DCS1800
30dBm
±2
WCDMA
24 dBm
+1/-3
CDMABC0
25 dBm
±2
TDSCDMA
24 dBm
+1/-3
LTE
23 dBm
±2.7
6.12 Module Conduction Receiving Sensitivity
The table below lists the conducted receive sensitivity of the module and is tested under static
conditions.
Table 6.11: Conducted Receive Sensitivity
Frequency band
Receive sensitivity
(typical)
Receive sensitivity (maximum)
GSM850、EGSM900
<-108dBm
3GPPrequirements
DCS1800
<-108dBm
3GPPrequirements
WCDMAB1
<-109 dBm
3GPPrequirements