Specifications

Power connector
Description Spare part number
Power connector (includes cable) 640891-001
Before removing the power connector cable, remove the following components:
1. Battery (see
Battery on page 41)
2. Service door (see
Service door on page 42)
3. Hard drive (see
Hard drive on page 43)
4. Optical drive (see
Optical drive on page 45)
5. Keyboard (see
Keyboard on page 51)
6. Top cover (see
Top cover on page 53)
Remove the power connector:
1. Turn the computer right-side up, with the right side toward you.
2. Disconnect the power connector cable (1) from the system board.
3. Lift the power connector (2) from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
62 Chapter 4 Removal and replacement procedures
Meijer.com