User's Manual

1:10
BMW Z4 Coupe M (Model: 8209)
Nissan fairlady Super GT (Model: 8210)
Mini Cooper S (Model: 8211)
User Manual
Thank you for purchasing this remote control toy car. In order to gain a thorough understanding of the
product and a safe, trouble-free operation, please read the following instructions carefully before use.
I. Specifications and Features:
This toy car has forward and reverse functions as well as right and left steering and stop functions.
II. Installing the batteries and antenna and charging the batteries:
1. Gun style remote control unit: Remove the battery compartment cover, insert one 9V 6F22,
battery into the battery compartment. Ensure that the battery is inserted properly by matching the
+ and - symbols on the inside of the battery compartment. Close the compartment cover. Turn
the power switch to “On”, the remote control unit is now powered on and a red power indicator
light comes on.
2. Insert the antenna into the small hole on the top of the remote control unit; screw it in tightly by
turning it in a clockwise direction. You can unscrew and remove it by turning it in an anti-
clockwise direction.
3. Remote control car: Remove the battery compartment cover on the back of the car. Connect the
plug of the battery cable to the power port of the car (matching the plug to the port). Insert the
battery pack into the battery compartment of the car and close the compartment cover. Turn the
power switch to “On” to power the car on. The remote control car should remain motionless.
4. Charging the battery: (parental supervision is recommended)
Insert the plug of the battery cable into the port of the battery charger (matching the plug to the
port). Then connect the plug of the battery charger to AC power outlet. Charging should start.
Charging takes about 4~6 hours to complete (it is not advisable to charge the battery for an
excessive length of time).
Before using the charged battery after charging, first unplug the battery charger from the power
outlet and then press lightly on the rear part of the battery charger to release it from the ports.
5 Do not mix old and new batteries.
6 Do not mix alkaline,standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
III. Operation
1. Turn the power switch of the remote control car and the remote control unit to the “On” position
and then place the car on the ground.
2. Operate the gun style remote control unit. When the trigger is pulled back half way, the remote
control car will move forward at a low speed. When the trigger is pulled back fully, the remote
control car will move forward at a high speed. When the trigger is pushed forward, the remote
control car will reverse. When the direction steering wheel of the remote control unit is turned
clockwise, the remote control car will steer to the right and when it is turned anti-clockwise, the
car will steer to the left (the correct method of operation is to hold the remote control unit with the
left hand and use the fingers of the left hand to operate the trigger; use the right hand to operate
the steering wheel).
3. If the remote control car fails to run in a straight line, adjust the direction adjustment rod on the
back of the car by moving it slightly to the right/left until the straightest position is achieved.

Summary of content (3 pages)