User's Manual

SETUP

SOUNDBAR PLACEMENT

For most applications, placement should be below a flat screen TV on a cabinet top or shelf. Other options for placement

include On-Wall using the included bracket, or attached to a Flat Panel mount using the optional Strong mount bracket.

INSTALLING ON OR IN A CABINET

When placing the soundbar on a cabinet shelf, the front edge of the speaker should be flush with the front of the shelf.

Placing the speaker further back on the shelf will degrade the sound quality of the speaker.

MOUNTING ON A WALL

CONSIDERATIONS FOR WALL MOUNTING

To maintain a proper listening experience, the soundbar should be as close to the TV as possible. Placing the soundbar

more than 3” from the screen will separate the audio from the video and provide a poor viewing and listening experience,

keep this in mind when locating the soundbar.

ATTACHING THE WALL BRACKET

1. Mark the position of the bottom of the TV.

2. Mark the position of the TV’s Center Point.

3. Remove the TV from the mount

INSTALLING THE MOUNT

1. Locate wall studs using a stud finder (not included).

2. Place the Bracket on the wall with the flat side towards the wall and the notched center mark facing up. The

Soundbar Center mark should be located at the center point of the installed television.

3. Position the Bracket Vertical Center v groove 2 1/8 ” from the bottom of the TV. This will place the soundbar

flush with the bottom of the TV when installed.

4. Level the bracket and attach it to the wall studs using the horizontal screwhole slots. All 4 screws should be

used, making sure to keep the bracket flat to the wall and securely attached.Note: If wall studs cannot be used,

wall mollies or anchors with the appropriate weight rating for the soundbar can be used.

5. Clip the soundbar onto the bracket, and center by adjusting left to right.