User's Manual

SCR400 FM Radio Operation
Press SOURCE to display the source menu. Use
to highlight FM1 or FM2 in the display,
then press ENTER. The last station tuned in is
recalled. The FM station group is shown in the
upper left of the display. Any RDS data the sta -
tion is broadcasting appears in the display. If the station tuned in
is stored in a preset, the preset number appears in the display. In
this example, the station is preset 2 of the FM1 group.
Manual Station Tuning – Press to tune up or down the
radio band. A single press will tune up or down one step. Press
and hold the button to rapidly move through the radio band.
Auto FM Station Seek – On the front panel,
press AUTO to start the seek mode, then press
or to start seeking up or down the band. Or
press and hold or on the remote to start
the seek mode. When a strong station is found
it starts playing.
FM1 / 2
99.50 Mhz
SCR400D DAB Radio Operation
Press SOURCE to display the source menu. Use
to highlight DAB1 or DAB2 in the display,
then press ENTER. The last station tuned in is
recalled. The DAB station group is shown in the
upper left of the display. If the station tuned in
is stored in a preset, the preset number also appears in the
display. In this example, the station is preset 4 of the DAB1
group.
First Time Use – The first time the DAB radio is
used, the system automatically goes into seek
mode. The first 8 stations found will be put into
the available presets.
Manual Station Tuning – Press AUTO to display
a list of available stations. Scroll up or down the
list with . After 2 seconds the highlighted
station is selected.
Using Presets – The SCR400 can store up to 8 FM station
presets, 4 in each group, FM1 and FM2. To recall a preset
station, you must select the FM station group in which the station
was stored, then press the appropriate preset button.
Storing a Preset – Select the FM station group
in which you want to store the station. Tune in
the station using .
Press and hold the button for the preset where
you want to store the station. When the preset
number appears in the display, the preset is
stored. In this example the station is stored in the
FM2 station group, in preset 4.
FM2
107.9Mhz
FM2 / 4
107.9Mhz
Using Presets – The SCR400D can store up to 8 DAB station
presets, 4 in each group, DAB1 and DAB2. To recall a preset
station, you must select the DAB station group in which the
station was stored, then press the appropriate preset button.
Storing a Preset – Select the DAB station group
in which you want to store the station. Tune in
the station as described above in the Manual
Station Tuning section.
Press and hold the button for the preset where
you want to store the station. When the preset
number appears in the display, the preset is
stored. In this example the station is stored in
the DAB1 station group, in preset 4.