User's Manual

VOL
Sub VOL
Setting Volume Level
Press the Volume - button to lower the system volume. Press the
Volume + button to make the system volume louder.
Adjusting the Subwoofer Volume
Use the rear mounted subwoofer level control to adjust the amount
of bass you desire. Bass output may vary due to room
environment and location of the 4TV console.
Setting the Trim Switch (Optional)
Use the rear mounted trim switch to adjust the level of input from
your TV or other audio device. Some TVs or devices may have a
weak output signal or the signal strength may be too strong and
can create noise. There are 3 positions on the switch to allow you
to adjust to the optimal setting.
Mute
To mute the system volume, press the “Mute” button on the control
panel.
Trim
1 2 3
Program your Remote Control (Program Volume Up)
Step 1. Press the Remote Learning button on the 4TV control
panel. The Remote Learning light will turn on and flash.
Step 2. Press the Volume + button on the 4TV control panel to be
learned. The Remote Learning light will turn on.
Step 3. While pointing your TV or Cable/Sat remote control to
the 4TV, press the Volume Up button on the remote control to be
learned. The Remote Learning light and the Volume Up light on the
4TV will blink 9 times and then turn off to confirm.
learning
Remote
learning
Remote
VOL
learning
Remote
VOL