Operating Instructions and Installation Instructions

3.2 HOW TO USE BURNERS OF THE COOKING TOP
If you use the burners properly, the consequence will be a maximum ef ficiency, thus saving energy.
The power of the burners is shown on table 1.
In order to obtain this, you must choose pans according to the size of the burner see the table 2.
If the flame is wider than the pan you are wasting energy.
YES NO
Attention
Only use containers with flat bottoms
Use containers that do not exceed the edges of the work table
This models having a grid reductive removable, it can be used to enable use of smaller containers with the
necessary stability
IMPORTANT:
In the models with triple burner be attention with this point:
Put in the correct position the cover spreader of the middle screw down the cover spreader,
to guarantee a good burning.
IGNITION OF THE HOT PLATE BURNERS
To ignite the burners proceed as follows:
- Press the ignition button .
- Selecting the burner to use, push the corresponding knob and turn it counter clockwise to the "full position",
indicated by a large flame .
- To reduce the power to turn the knob to the "low position", indicated by a small flame .
To switch off the burner, just turn the knob clockwise to the "of f position", indicated by a black circle in the upper
position of the panel .
All models have a security system in the burners of the cooking top
If the gas supply is deficient or if the flame is extinguished accidentally, the gas circuit will be automatically closed.
To restart is necessary an user intervention.
In this case and after verify that isn't a gas supply problem, wait at least one minute and repeat the lighting.
For ignite this type of burner it's necessary maintaining the knob under pressure for 10 seconds.
After this time release the knob of the burner which must be in function.
INSTRUCTIONS MANUAL
14