Operating Instructions and Installation Instructions

9880022302-EN-250717.doc
18
EN
N
REMOVING/MOUNTING THE GLASS INSIDE THE OVEN DOOR
General notes
To make it easier to clean the door, you can remove the glass inside it. To remove it,
follow the instructions below depending on the door model fitted on the oven.
Important: To remove the internal glass you need to remove the door from the oven
(see paragraph on “Removing the oven door”) and place it on a steady surface that
ensures the necessary steps are conducted safely.
Attention : do not use any kind of blunt or sharp instrument that could break
the glass or damage the door.
Pay attention to which way you place the glass surfaces when you put them back as
they cannot be turned around. If they are not positioned correctly, this may affect
the operation of the oven or even seriously damage the appliance.
Press door model (remove the oven door) You can use thin cylindrical objects (e.g.
two coins with a diameter of approximately 25 mm and a 2 mm thickness). Insert
them between the enamelled door and the glass in the areas close to the clips A that lock
the glass into place in the upper part of the door. Press until you hear a “click”, which
means that the clip has come out. Now lift the glass and take it out.
The intermediate glass is located immediately beneath (in versions where this is
present) and must only be removed by qualified personnel.
fig. 1