Operation Manual

INSTRUCTIONS MANUAL
11
Before switching on the appliance check that it is correctly regulated for the type of gas and electricity available.
When burners are light check the Flame are always regular.
Before removing the saucepans turn off the burners
The user must not change the appliance electricity supply cable. For replacement contact only a qualified person.
The use of a gas appliance requires a regular exchange of air. Make sure that the installation complies with the
Installation section 2.1.
Before using the oven for the first time pre-heat an empty oven to the maximum temperature for about 30 minutes
to remove residual smells and smokes due to the manufacturing process without passing them to the food.
Install the cooker firmly and level it.
Gas appliance produce warm and moist products of combustion. Be sure that the location is well vented: Keep a
window open or install a rangehood or exhaust fan which vents to the outside.
In the case of intensive and prolonged use, it may be necessary to increase the ventilation, for example, open more
windows or increase the speed setting of the rangehood or exhaust fan, if one is installed.
The materials surrounding this appliance must withstand a temperature of 90º C.
Before installing the cooker, remove the plastic sheathing covering some metal parts.
The glass lid should always be opened when the cooker is operating and also while the burners are hot.
Only use the cover to protect the hob and for no other purpose.
Pay attention if cooking with grease or oil because if overheated, it can ignite.
Use exclusively pots and pans with a flat base.
During cooking the appliance becomes very hot. Never touch any parts on the top or inside the oven without
protection from heatproof gloves.
WARNING:
Do not spray aerosols in the vicinity of this appliance while it operation.
Where this appliance is installed in marine craft or in caravans, it shall not be used as a space heater.
Do not store inflammable materials in the storage drawer.