Operation Manual

2 INSTALLER'S GUIDE
2.1 COOKER INSTALLATION
The Manufacturer declines any an all responsibilities for damages to things or injuries to persons or animals
deriving from incorrect installation or use of equipment.
This appliance is class 1: isolated kitchen appliance, free-standing installation, and is designed for use by private
non-professional, and adults inside the home.
The gas and electricity conditions are indicated in labels near the gas / electricity inlets.
The cooker installation should be executed only by qualified and authorised personnel.
The walls of the sided furniture must resist to a temperature 75ºC higher than ambient temperature.
The back wall must be of non-combustible material.
Combustible materials, like curtains must be at the minimum distance of 500 mm.
The furniture sided the cooker, if higher than the cooking plan, must be at a minimum distance of 150 mm from
the side of the appliance - unless that surface is constructed of a suitable non-combustible material for the entire
length of the cooking surface.
Any horizontal surface situated within 200mm from the edge of any hob burner must be a minimum of 10mm below
the cooking surface or else comply with the above.
If the cooker is installed under a suspended element, this one must be placed at a minimum 700 mm of distance
from the cooking plan.
The furniture over and sided the appliance must have a minimum clearance of 450 mm from the cooking surface.
Any rangehood above the cooker must be installed according to the manufacturer's instructions, with a minimum
distance of 600 mm from the cooking surface.
The appliance must be installed in places with proper conditions relative to dimensions, ventilation and exhaust of
combustion products.
This appliance is not designed to be connected to an exhaust combustion products device.
Before installing the cooker, remove the protective plastic sheathing covering some metal parts.
INSTRUCTIONS MANUAL
5
500
600
450
150
10
10