Operation Manual

INSTRUCTIONS MANUAL
14
3.4 THE VITRO TABLE USE
If the bottom of the pan you use is plane, It's possible user glass recipients or porcelain recipients
The pans diameters should be accorded to the diameter of the work area.
Don't use recipients with a inferior diameter to the work area.
Cover the recipients during the cooking, for economise energy.
How to use the work area:
The functioning of the work area is realised turning the handle in 3 positions, to the selected position ( 1 - minimum
; 3 - maximum ).
In the models with double heating ( refª D ), this is activated turning the handle clockwise until doing a " click " the
double area is activated , put the handle in the position selected ( 1- 3 ).
IT IS RECOMMENDABLE:
Never let the plate working empty because this could lead to it's destruction.
If the bottom of the pan you use is plane, you will obtain a complete exploitation of the heat, means saved energy.
This is indicated the correct position of the pan on the electric plate.
YES NO NO NO
The pans diameters should be accorded to the diameter of the plate. If the diameter of the recipient is superior, the
cooking time will be prolonged.
If the diameter of the recipient is too small you will spend energy, the food could fall and damage the plate.
How to use the electric plates
The functioning of the electric plates is realised turning the knobs in 7 positions, and, put the position selected in
the upper position of the panel.
The minimum power corresponds to the Position 1, the maximum power to the Position 6, see table 3.
To switch off the electric plate turn the knob and put the number 0 in the upper position of the panel
A light signal placed in the control panel indicates the working of a electric plate.