Operation Manual

2.4 CONVERSION TO OTHER TYPE OF GAS

This operation must be executed always by qualified and authorised personnel.

This appliance has been designed to function with Propane or Natural gas.

This appliance is provided with a label on the rear panel, near the gas inlet, indicating the type of gas and pressure

for which the cooker has been adjusted.

The indication of the gas and pressure that the cooker has been adjusted to can also be found on the data label

or on the package of the appliance.

In order to convert from one type of gas to an another, proceed as follows:

1 - Choose Inlet gas connection according to the type of gas available in your home.

2 - Cooking top burners:

2.1 - Remove the pan supports from the hob, the burner covers, burner speaders and the burner skirts.

2.2 - Unscrew and remove the injectors, and replace them those corresponding to the available gas (see table 1).

2.3 - Replace all burner components and the pan supports.

3 - Oven

3.1 - Open the oven door and remove all internal accessories

and oven bottom

3.2 - Remove the burner by loosing the screw placed in the

front and turning it highwards

3.3 - Unscrew and remove the injector and replace them those corresponding to the available gas see table 1

3.4 - Screw the burner and put in place the the oven bottom and the internal accessories

INSTRUCTIONS MANUAL