Operation Manual

INSTRUCTIONS MANUAL
13
3.3 THE ELECTRIC PLATES USE
ATTENTION
The electric plate is covered by varnish for protection.
Before the first use, the plate must function empty, with the knob placed in position 6 during 3 minutes.
IT IS RECOMMENDABLE:
If the bottom of the pan you use is plane, you will obtain a complete exploitation of the heat, means saved
energy. In this figure is indicated the correct position of the pan on the electric plate. 
YES NO NO NO
The pans diameters should be accorded to the diameter of the plate. If the diameter of the recipient is
superior, the cooking time will be prolonged.
If the diameter of the recipient is too small you will spend energy, the food could fall and damage the
plate.
How to use the electric plates
The functioning of the electric plates is realised turning the knobs in 7 positions, and, put the position
selected in the upper position of the panel.
The minimum power corresponds to the Position 1, the maximum power to the Position 6, see table 3.
To switch off the electric plate turn the knob and put the number 0 in the upper position of the panel
A light signal placed in the control panel indicates the working of a electric plate.