Operation Manual

INSTRUCTIONS MANUAL
7
2.4 CONVERSION TO OTHER TYPE OF GAS
This operation must be executed always by qualified and authorised personnel.
This appliance has been designed to function with Propane or Natural gas.
This appliance is provided with a label on the rear panel, near the gas inlet, indicating the type of gas and
pressure for which the cooker has been adjusted.
The indication of the gas and pressure that the cooker has been adjusted to can also be found on the data
label or on the package of the appliance.
In order to convert from one type of gas to an another, proceed as follows:
1 - Choose Inlet gas connection according to the type of gas available in your home.
2 - Cooking top burners:
2.1 - Remove the pan supports from the hob, the burner covers, burner speaders and the burner skirts.
2.2 - Unscrew and remove the injectors, and replace them those corresponding to the available gas (see
table 1).
2.3 - Replace all burner components and the pan supports.
3 - Oven
3.1 - Open the oven door and remove all internal
accessories and oven 
3.2 - Remove the burner by loosing the screw placed
in the front and turning it highwards 
3.3 - Unscrew and remove the injector and replace them those corresponding to the available gas see table 1
3.4 - Screw the burner and put in place the the oven bottom and the internal accessories