Operation Manual

4 - Grill

4.1 - Open the oven door and remove all

internal accessories.

4.2 - Remove the burner / reflector unit

by loosing the screw fixing the reflector

and remove all elements from the injector

support by turning downwards

4.3 - Unscrew and remove the injectors

and replace them those corresponding to

the available gas see table 1

4.4 - Screw the burner / reflector and put in place the internal accessories.

5 - Low flow adjustment:

5.1 - Light the burner on and put the knob to the Low Position.

5.2 - In this position, remove the knob of the tap.

5.3 - With screw - driver perform on the

taps screw until the flame is conveniently

regulated to the low position and stable

5.4 - Reassemble the knob and pass quickly from the Full On Position to the Low Position, several times,

to ensure that the flame remains stable.

6 - After connecting the unit, check for gas leaks with soap and water solution. NEVER USE A FLAME.

7 - Place, near the inlet gas connection, a label indicating the type of gas for which the appliance is now

prepared. "Appliance prepared for..."

INSTRUCTIONS MANUAL