Operating Instructions and Installation Instructions

INSTRUCTIONS MANUAL

3.11 DIGITAL TIMER

Time of Day Adjustment

Press the + and - buttons together. The point between the hours and minutes will start to flash.

Using the + and - buttons, you can adjust the current time of day. Long presses of those buttons will enable fast

adjustments.

Pressing the + and - buttons a long time, until the hour and point between the hours and minutes start to flash,

will enable you to adjust just the hours portion of the display.

Minute Minder Adjustment

Press the + button. The screen will return to displaying the ' 0.00 ' and the bell symbol will start to flash. You can

adjust the minute minder using the + or - buttons.

After 6 seconds following the adjustment, the bell symbol will be stabilized. The minute minder will start to countdown.

The minute minder time increments are in 10 seconds up to 99 minutes 50 seconds, thereafter the display will show

1 hour and 40 minutes and the adjustment will be in 1 minute steps.

Note: In order to cancel a minute minder program, set the minute minder time down to 0.00

Cancelling the Buzzer Sound

When countdown of the minute minder is completed, the screen will return to displaying the current time of day.

The bell symbol will start to flash, a buzzer alarm is heard and will sound, if not stopped, for 7 minutes.

Press any button to cancel the sound.

Buzzer Tone Adjustment

You may adjust the buzzer tone of the timer in following way:

1) Pressing the (-) button, you can hear the currently set tone

2) Releasing (-) and then pressing again, you can hear the next available ( total 3 ) tone

3) The last sound heard will be your adjusted one

Note: Factory setting is the maximum level ( highest frequency ) a long interrupt of power may result in reloading

this setting.