Specifications

Connecting & Operating the MA-1

Please see next page with regards to installing the MA-1’s USB Audio drivers.

1. Connect the included power cable to the MA-1 power connector than to a free power

receptacle.

2. Connect the appropriate digital source connections up to the MA-1's digital inputs

using the appropriate high quality digital audio and USB cables.

3. Connect the appropriate analog outputs of the MA-1 to your pre-amp or integrated

amplifier.

4. Turn on the MA-1 using the main power switch and select a digital input by pressing

one of the digital input selector buttons.

5. Once the MA-1 receives a valid digital audio stream from the digital source, the

detected frequency LED will light up signifying that the MA-1 has started its

conversion process.

5. Please see example above. The USB Audio input is selected hence the USB Audio

LED is lit. Once the MA-1 detects a valid digital audio stream the appropriate sample

frequency LED will be lit. In this case the MA-1 has a detected a valid 96kHz digital

audio stream.

MA-1 Stereo D/A Converter Manual

013

Connecting & Operating the MA-1