Specifications

Connecting & Operating the MA-1

6. Once locked to a sample frequency the MA-1 will start its conversion process and you

will almost instantaneously be able to listen to music.

7. The MA-1 remembers the last digital input it was switched too prior to being switched

off.

USB Audio Input:

1. First you will need to obtain the appropriate USB cable to connect the MA-1 to any

USB digital audio source component (computer, laptop, media server etc.).

2. The MA-1’s USB Audio interface uses the B-type USB connector similar to connectors

used on printers. Please see image below:

3. Connect the MA-1 USB Audio interface to a USB digital audio source component

using the appropriate USB cable.

4. Select the USB Audio input using front panel input selector buttons.

5. For MAC OSX systems, no driver is needed. OSX has the appropriate USB driver

already installed.

6. For Windows XP, Vista (32 or 64bit) and Windows 7 (32 or 64bit) systems install the

provided USB driver by double clicking the “setup.exe” file located on the software CD

included in the accessories box. Read and follow the driver installation instructions.

7. Kernal, ASIO and WASAPI (Vista and Windows 7) drivers will be installed.

MA-1 Stereo D/A Converter Manual

014

Connecting & Operating the MA-1