MEITRACK MT90 User Guide MEITRACK MT90 User Guide
MEITRACK MT90 User Guide Change History File Name MEITRACK MT90 User Guide Created By Kyle Lv Project MT90 Creation Date 2011-05-16 Update Date 2014-10-14 Subproject User Guide Total Pages 14 Version V2.1 Confidential External Documentation Copyright © 2014 Meitrack Group All rights reserved.
MEITRACK MT90 User Guide Contents 1 Copyright and Disclaimer...............................................................................................................................................................- 4 2 Product Overview ..........................................................................................................................................................................- 4 3 Product Function and Specifications .........................................................
MEITRACK MT90 User Guide 1 Copyright and Disclaimer Copyright © 2014 MEITRACK. All rights reserved. and are trademarks that belong to Meitrack Group. The user manual may be changed without notice. Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.
MEITRACK MT90 User Guide 3D wakeup Listen-in/Two-way calling MT90(V4)/MT90_S: polygon geo-fence MT90(V4)/MT90_S: stillness/movement alarm MT90(V4)/MT90_S: online Parameter Editor MT90(V4)/MT90_S: super long battery life 3.2 Specifications Item Specifications Dimension 77 mm x 47 mm x 20 mm Weight 70g Charging voltage MT90(V4)/MT90_S: Micro USB charging port, DC 4.2 Remarks V–5.5 V/400 mA MT90: Mini USB charging port, DC 4.2 V–5.5 V/400 mA Standby battery 1100 mAh/3.
MEITRACK MT90 User Guide USB cable Travel adapter (charger) Screwdriver CD and Printed MEITRACK MT90 User Guide Lanyard 5 About the MT90 5.1 Appearance No. Item Description 1 GPS indicator (blue) Indicates GPS and battery status. For details, see the section 5.2 "Indicator." 2 GSM indicator Indicates GSM status. For details, see the section 5.2 "Indicator." (green) 3 Answer/Hang-up Press the button to receive an incoming call.
MEITRACK MT90 User Guide will blink for 10s. 8 9 Micro USB Used for charging, connecting a computer for parameter settings, and upgrading port/Mini USB port software. Volume+/GPS Log Press the button to turn up the volume. button Press and hold down the button for 2s to start hands-free conversation. In standby mode, press and hold down the button for 2s, when the buzzer sounds “BI” once, the recorder will run automatically.
MEITRACK MT90 User Guide 6 First Use 1. Remove the battery cover. Turn off the device. With the back panel facing you, use the mini screwdriver to remove the two screws to release the back cover. Then lift up the back cover from the notch at the bottom of the device. 2. Insert the SIM card. Gently push the SIM card into the slot until you hear a click with the gold-colored side facing down.
MEITRACK MT90 User Guide 5. Charge the battery. The battery is partially charged before shipped. Before using the device for the first time, you are advised to turn off the device and then charge the battery for 8 hours. To charge the battery, you can connect the device to the adapter or a computer through the USB cable. Note: Do not remove the battery unless necessary during charging. While charging, the device may heat up. This is normal and does not affect your device’s lifespan or performance.
MEITRACK MT90 User Guide SMS example: Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329 The following table describes the SMS format: Parameter Description Remarks Now Indicates the current location. SMS header: indicates the alarm type. For details about the SMS header, see the MEITRACK SMS Protocol and MEITRACK GPRS Protocol. 110727 02:48 Indicates the date and time in None YYMMDD hh:mm format. V The GPS is invalid.
MEITRACK MT90 User Guide Note: The default password of the tracker is 0000. The password can be changed by using Meitrack Manager or SMS commands. After the password is changed successfully by using an SMS command, only the authorized phone number can receive SMS reports. The common format of an SMS command is: Password,Command,Parameter. 7.2 SOS – A71 This command is used to set the SOS number. When you call the phone number, an SMS report about the location and other SMS functions will also be received.
MEITRACK MT90 User Guide 7.3 Listen-in – A72 The command is used to listen in to the surrounding environment. After the setting, the device is allowed to confidentially and automatically answer a phone and enters listen-in state for one-way communication. Note: If Auto Answer Incoming Call and Monitor are set for a same phone number, only Auto Answer Incoming Call takes effect.
MEITRACK MT90 User Guide In deep sleep mode, if you want to obtain the location by SMS/call and the GPS cannot be positioned within 5 minutes, the device will reply a link with the GPS map instead of location information. After the device enters the deep sleep mode, functions of Track By Time Interval, Track By Distance, and GPSLog are not available until you manually disable the sleep mode. The device can be woken up from the sleep mode by pressing a key, call, or SMS.
MEITRACK MT90 User Guide For details about Meitrack Manager, see the MEITRACK Manager User Guide. Note: The CD delivered with the tracker contains Meitrack Manager. The software language will be automatically switched according to the operating system language. Press Ctrl + L to manually switch the language. 9 Logging In to the GPS Platform Visit http://www.trackingmate.