File Name: Project: MEITRACK VT300 User Guide VT300 Sub Project: Revision: User Guide V7.4 Creator: Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 1 - of 25 External Documentation MEITRACK® GPS Vehicle Tracker User Guide VT300 Copyright © 2013 Meitrack Group All rights reserved.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 2 - of 25 External Documentation Contents 1. Product Overview ..................................................................................................................................................................................... - 3 2. For Your Safety .................................................
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 3 - of 25 External Documentation 1. Product Overview VT300 is a GPS/GSM/GPRS tracking device specially developed and designed for vehicle real-time tracking and fleet management. With superior GPS and GPRS modules, VT300 has good sensitivity and stable performance. It can get accurate GPS fix even in remote places.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 4 - of 25 External Documentation 3. VT300 Characteristics Items Specification Power Supply +9V - +36V / 1.
VT300 with Battery File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: GPS Antenna GSM Antenna Screws Cavana Cheung 2010-08-26 2013-06-26 - 5 - of 25 External Documentation Wires with SOS Button CD 4.2 View Front View Side View Back View 4.3 Functional Parts Battery LED Off Power is off or charging is complete Flashing (every 0.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 6 - of 25 External Documentation phone number. Mini USB Used for firmware update and configuration on PC.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 7 - of 25 External Documentation 4.4.2 Antenna Connection Connect the GSM Antenna to VT300. Connect the GPS Antenna to VT300. - GPS antenna is used to receive satellite signals in the sky.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 8 - of 25 External Documentation For those ahead of GMT, input the time difference in minutes directly. For example, GMT+8, W000000,032,480 (8 hours is 480 minutes). ‘-‘is required for those behind GMT. For example, W000000,032,-120 (2 hours or 120 minutes behind GMT). Example: W000000,032,480 W000000,032,-120 7.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 9 - of 25 External Documentation Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24,01:50 7.3 Track by Preset Interval Command: W******,002,XXX Description: Set an interval for the tracker to continuously report its location by SMS Note: 1. XXX is the interval in minutes; 2.
File Name: MEITRACK VT300 User Guide Creator: Cavana Cheung Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: 2010-08-26 2013-06-26 - 10 - of 25 External Documentation 7.5 Track by MS01/MS02 You can also see a physical location on a map with our GPS Tracking Software MS01 or MS02. This software is available for purchase and can be used for tracking after proper Please refer to MS01/MS02 User Guide for more information. 7.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 11 - of 25 External Documentation Example: W000000,012, 220.121.7.89,8500 W000000,012,www.meiligao.net,8500 7.6.4 Set DNS Server IP (optional) Command: W******,009,DNS Server IP Description: If the domain name you set by the last command (W******,012,IP, Port) doesn’t work, your servers IP is not properly set.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 12 - of 25 External Documentation Note: F=0, to turn off this function; (default) F=1, Sends SMS to the authorized phone number. T: Preset phone number. Max.16 digits.
=5, 300m File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: =6, 500m =7, 1000m Cavana Cheung 2010-08-26 2013-06-26 - 13 - of 25 External Documentation =8, 2000m 2. Radii: [1, 4294967295] meter(s), suggest to be set above 100 meters. 3. GPRS command is 0x12. Example: W000000,006,1 When tracker moves out of this circle scope, it will send out an SMS alarm. 10.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 14 - of 25 External Documentation 12. Engine Cut Relay Connection: Connect a relay as the below picture shows: Calculate the correct VCC value according to relay’s parameter to comply with the following requirements: Output open drain sink voltage (ineffective) 45V max.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 15 - of 25 External Documentation F=1, to open the output (low voltage). Example: W000000,120,1 W000000,220,1 Once the relay is properly installed, send this command to VT300. When its speed reaches at 10km/h or 20km/h, it will stop the engine. 13.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 16 - of 25 External Documentation Command: W******,990,099### Description: This sets all settings, except for the password, back to factory default. Note: Send SMS “Default?” to the device. Within 120 seconds, send this SMS command to the tracker. ### is the ending character and is required in the text message.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 17 - of 25 External Documentation Please refer to Meitrack Parameter Editor for more information. 19. Copyright and Disclaimer © Meitrack Group All rights reserved. The information contained herein may be changed at any time without prior notification.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Description SMS Command Example Track on Demand W******,000 W000000,000 Cavana Cheung 2010-08-26 2013-06-26 - 18 - of 25 External Documentation Remarks: To get the current location of the tracker, send this command as an SMS or make a telephone call directly to the tracker.
Geo-fence Alarm File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: W******,302,X Cavana Cheung 2010-08-26 2013-06-26 - 19 - of 25 External Documentation W000000,302,22.000000,-114.123456,3000,1,1 Remarks: Turn on Geo-fencing alarm. When the tracker moves in/out the preset scope, it will send an SMS alarm to the authorized phone number for SOS. Note: 1.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 20 - of 25 External Documentation I=1, turn on the function of sending an SMS alarm to the authorized phone number for SOS when the extra power of the vehicle tracker is cut. J, defaulted as 1. ### is the ending character.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 21 - of 25 External Documentation data=0, to turn off this function; data=1~65535, set interval for heartbeat. In this example, the tracker will send heartbeat every 10 minutes. Set Sensitivity of Tremble Sensor W******,035,XX W000000,035,30 Remarks: Send this command to set sensitivity of tremble sensor.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 22 - of 25 External Documentation XX=01~99, to turn on Power Down after a specified period of being inactive. It is in unit of minutes. In this example, the tracker will enter power down mode after it is inactive for 10 minutes.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.
File Name: MEITRACK VT300 User Guide Creator: Project: VT300 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2013-06-26 - 25 - of 25 External Documentation SIM card has expired Check in phone that the SIM can send SMS message. Replace SIM card if needed SIM has PIN code set Remove PIN code by inserting SIM in you phone and deleting the code SIM is warped or damaged Inspect SIM, clean the contacts.
