Motorola AM21 Digital Audio Baby Monitor For: AM21 and AM21-2 User Guide
Welcome... to your new Motorola Baby monitor! Thank you for purchasing the Digital Audio Baby Monitor. Now you hear your baby sleeping in another room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt as proof of warranty status. Registration is not required for warranty coverage. For product related questions, please contact us by visit: motorolanursery.
Overview of the Parent Unit 7 1 2 3 6 5 4 8 1. Power/Link indicator On when the parent unit is powered on and linked to the baby unit. Flashes when the parent unit is searching the baby unit. 2. Microphone 3. LEFT button < Press to decrease the speaker volume. 4. RIGHT button > Press to increase the speaker volume. 5. Power button 0 Press and hold to power on/ off the parent unit. 6. Battery cover 7. Speaker 8.
Overview of the Baby Unit 3 1 4 2 5 6 1. 2. 3. Microphone Power button 0 Press and hold to power on/ off the baby unit. Speaker 4. Power indicator On when the baby unit is powered on. 5. Power jack 6. Temperature sensor Important guidelines for installing your digital baby monitor • To use your baby unit and parent unit together, you must be able to establish a radio link between them. Note - The range may be affected by environmental conditions.
Table of contents 1. Safety Instructions...........................................................................6 2. Getting Started.................................................................................8 2.1 Baby unit power supply......................................................................... 8 2.2 Parent unit power supply...................................................................... 9 2.3 Parent unit battery installation......................................................
1. Safety Instructions WARNING: Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1metre away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
BABY MONITOR SET UP & USE: • Determine a location for the BABY UNIT that will allow you to hear your baby in his/her cot. • Place the BABY UNIT on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots under the stand. • NEVER place the Baby Unit or cords within the cot. WARNING This Digital Audio Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User Guide, safe to use.
2. Getting Started 2.1 Baby unit power supply • Insert the DC plug of the power adapter into the DC jack on the side of the baby unit, as shown. • Connect the other end of the power adapter to a suitable mains power socket. • The Power indicator will illuminate. NOTE Only use the power adapter provided (DC6/400mA).
2.2 Parent unit power supply MBP21PU • Insert the DC plug of the power adapter into the DC jack on the side of the parent unit. • Connect the other end of the power adapter to a suitable mains power socket. • The parent unit will turn on. NOTE Only use the power adapter provided (DC6/400mA).
2.3 Parent unit battery installation As an option, the Parent Unit can be powered by alkaline batteries (Size AAA x 2, NOT included), so that it continues to work if you disconnect it from the mains power to carry it to another location. Please follow the steps below to install alkaline batteries. • Open and lift the battery door up as shown in the figure. (Fig.b1) (Fig.b1) (Fig.b1) (Fig.b1) • Insert the alkaline batteries follow the direction into battery compartment.(Fig.b2) (Fig.b2) (Fig.b2) (Fig.
3. Using Your Digital Audio Baby Monitor Please read these instructions carefully, and be aware that this digital audio baby monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision. 3.1 Power on or off the Baby Unit • Press and hold 0 to power on the baby unit. The Power indicator will illuminate. • Press and hold 0 again to power off the baby unit. The Power indicator will extinguish. 3.
4. Disposal of the Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
5. Cleaning Clean your Digital Audio Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Digital Audio Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Digital Audio Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet.
6. Troubleshooting Power/Link Indicator on the parent unit does not come on • Check whether the parent unit is powered on. Power/link indicator on the parent unit flashes • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1 metre. • The baby unit may be powered off. Press and hold 0 to power on the baby unit. • Replace with new alkaline battery (size AAA x 2).
The Digital Audio Baby Monitor system produces a highpitched noise • The parent unit and the baby unit are too close to each other. Make sure that the parent unit and baby unit are at least 1 metre away from each other. • The speaker volume of the parent unit may be set too high. Decrease the volume of the parent unit. Refer to section 3.3 for volume level settings. Battery in the parent unit is running low quickly • The volume level of the parent unit may be set too high, which consumes power.
7. General Information If your product is not working properly, read this Quick Start Guide or the User’s Guide of one of the models listed on page 1. Please contact us by visit: motorolanursery.com.suppoort Consumer Products and Accessories Limited Warranty (“Warranty”) Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei Electronics Co. LTD ("MZGW").
What will MZGW do? MZGW or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Products Covered Length of Coverage Consumer Products One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories that are Repaired or Replaced The balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer.
Unauthorised Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, MZGW or its authorised service centres, are excluded from coverage. Altered Products.
Disposal of the Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
FCC and IC regulations FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
8. Technical Specifications Baby unit Frequency 1881.792 - 1897.344 MHz for EU Channels 10 for EU 5 for USA & Canada 10°C - 40°C 1921.536 - 1928.448 MHz for USA & Canada Operating temperature Power supply adapter Rating Input 100 - 240VAC, 50/60Hz, 200mA Output 6VDC, 400mA Parent unit Frequency 1881.792 - 1897.344 MHz for EU Channels 10 for EU 5 for USA & Canada 10°C - 40°C 1921.536 - 1928.
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2021 Motorola Mobility LLC. All rights reserved.
