Motorola AM24 Digital Audio Baby Monitor For: AM24 and AM24-2 User Guide
Welcome... to your new Motorola Baby monitor! Thank you for purchasing the Digital Audio Baby Monitor. Now you hear your baby sleeping in another room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt as proof of warranty status. Registration is not required for warranty coverage. For product related questions, please contact us by visit: motorolanursery.
Overview of the Parent Unit 9 1 10 2 8 3 7 4 6 11 5 1. 2. 3. 4. 5. LCD Display Microphone UP button + Press to increase speaker volume. While in a menu, press to scroll up. LEFT button < / M Press to access the main menu. While in a menu, press to access the sub-menu, or confirm the settings. DOWN button Press to decrease the speaker volume. While in a menu, press to move down the menu list. RIGHT button > / T Press to cancel settings and go back to the previous level.
Overview of the Baby Unit 1. 2. 3. Microphone Power button 0 Press and hold to power on/off the baby unit. Speaker 4. 5. 6. Power indicator On when the baby unit is powered on. Power jack Temperature sensor Important guidelines for installing your digital baby monitor • To use your baby unit and parent unit together, you must be able to establish a radio link between them. Note - The range may be affected by environmental conditions.
Table of contents 1. 2. 3. 4. 5. 6. 7. 8. Safety Instructions ..................................................................6 Getting Started ........................................................................9 2.1 2.2 2.3 Baby unit power supply ............................................................. 9 Parent unit battery installation ................................................ 10 Parent unit power supply ..........................................................
1. Safety Instructions WARNING: Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1metre away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
BABY MONITOR SET UP & USE: • Determine a location for the BABY UNIT that will allow you to hear your baby in his/her cot. • Place the BABY UNIT on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots under the stand. • NEVER place the Baby Unit or cords within the cot. WARNING This Digital Audio Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User Guide, safe to use.
• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. The power adaptors are: Shenzhen Huajin Electron Co., Ltd. (HJ-0600400A1-US) or Dongguan Everest Industrial Co., Ltd. (EP19-060040WXLA) • Only insert a battery pack: GPI International Ltd. (GP75AAAH2BMJZ) • Do not touch the plug contacts with sharp or metal objects. • Connect the power adapters to easily accessible mains power.
• Insert the DC plug of the power adapter into the DC jack on the side of the baby unit, as shown. • Connect the other end of the power adapter to a suitable mains power socket. • The Power indicator will illuminate. NOTE Only use the power adapter provided (DC6V/400mA).
2.2 Parent unit battery installation The rechargeable battery pack supplied should be installed so that the Parent Unit can be moved without losing the link with the Baby Unit. Charge the parent unit before using it for the first time and when the parent unit indicates the battery is low. • Open and lift the battery door up as shown in the figure. (fig.b1) (Fig.b1) • Insert the plug of the rechargeable battery pack into the jack inside, fit the battery pack into the compartment. (fig.
• Insert the DC plug of the power adapter into the DC jack on the side of the parent unit. • Connect the other end of the power adapter to a suitable mains power socket, • The parent unit will turn on. NOTE Only use the power adapter provided (DC6/400mA).
3. Using Your Digital Audio Baby Monitor Please read these instructions carefully, and be aware that this digital audio baby monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision. 3.1 Power on or off the Baby Unit • Press and hold 0 to power on the baby unit. The Power indicator will illuminate. • Press and hold 0 again to power off the baby unit. The Power indicator will extinguish. 3.
3.4 Select display language for the parent unit Choose from 6 languages. • Press < / M twice on the parent unit when is not in use. • Press + or - to select ENGLISH, FRANCAIS , ESPANOL, DEUTSCH, ITALIANO or PORTUGUES. • Press < / M to confirm your selection. The display will show ‘SAVED’. 3.5 Turn sound alert on or off You can turn on the sound alert so that the parent unit beeps when a loud sound is detected by the baby unit. is displayed when sound alert is enabled.
4. Disposal of the Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
• Do not clean any part of the Digital Audio Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Digital Audio Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet. • Every effort has been made to ensure high standards of reliability of your Digital Audio Baby Monitor.
6. Troubleshooting Power/Link Indicator on the parent unit does not come on • Check whether the parent unit is powered on. • Check whether the supplied battery pack is correctly installed and that they are not drained. • Recharge the parent unit by connecting it to the mains power. Power/link indicator on the parent unit flashes and ‘Not Linked’ displayed on the screen. • The parent unit and the baby unit may be out of range with each other.
Cannot hear sound or baby cry from the parent unit • The volume level in the parent unit may be set too low. Increase the volume level of the parent unit. Refer to section 3.3 For volume level settings. • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1 metre. The Digital Audio Baby Monitor system produces a highpitched noise • The parent unit and the baby unit are too close to each other.
7. General Information If your product is not working properly, read this Quick Start Guide or the User’s Guide of one of the models listed on page 1. Please visit us at: motorolanursery.com/support Consumer Products and Accessories Limited Warranty (“Warranty”) Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei Electronics Co. LTD ("MZGW").
What will MZGW do? MZGW or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/pre-owned or new Products, Accessories or parts.
Products Length of Coverage Covered One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Products Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories that are Repaired or Replaced The balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer.
How to Obtain Warranty Service or Other Information? Please contact us by visit: motorolanursery/com/support You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a MZGW Authorised Repair Centre.
Disposal of the Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
FCC and IC regulations FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
8. Technical Specifications Baby unit Frequency 1881.792 - 1897.344 MHz for EU Channels 10 for EU 5 for USA & Canada 10°C - 40°C 1921.536 - 1928.448 MHz for USA & Canada Operating temperature Power supply adapter Rating Input 100 - 240VAC, 50/60Hz, 200mA Output 6VDC, 400mA Parent unit Frequency 1881.792 - 1897.344 MHz for EU Channels 10 for EU 5 for USA & Canada 10°C - 40°C 1921.536 - 1928.
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2021 Motorola Mobility LLC. All rights reserved.