User's Guide

32
Clock & Alarm
7. Clock & Alarm
If you have subscribed to your network’s Caller Display service, the date and
time is set automatically for all handsets when you receive your first call.
If you are not subscribed to Caller Display service, you can set the date and
time manually.
7.1 To set date and time manually
1. Press Menu , scroll D to Clock & Alarm and press Select .
2.
Date & Time is highlighted. Press Select .
3. Enter the date using the format MM/DD/YY e.g.
08/04/19 for 4 August
2019.
4. Enter the time (HH:MM) and press
Save .
If the current time format setting is 12 hour, select am or pm .
5. Press
n to return to standby mode.
Note
The date and time is retained during a power failure or when the batteries are
discharged.
7.2 To set alarm
When the alarm is set, the display shows icon.
Each handset can have a dierent alarm setting.
1. Press
Menu , scroll D to Clock & Alarm and press Select .
2. Scroll
D to Alarm and press Select .
3. Scroll
U or D to O or On and press Select .
If
Alarm is set to On:
Scroll
U or Dto Once , Mon - Fri or On Daily then press Select .
Enter the time (HH:MM) and press
Save .
If the current time format setting is 12 hour, select
am or pm .
4. Press
n to return to standby mode.
Notes
If the alarm is set to
Once , will disappear from the screen after the alarm has
sounded once.
If the alarm is set to
On Daily or Mon - Fri , will remain on the screen after the
alarm has sounded. When the alarm goes o, press any key to stop the ring.
7.3 To set time format
1. Press Menu , scroll D to Clock & Alarm and press Select .
2. Scroll
D to Time Format and press Select .
3. Scroll
U or D to 12 Hour or 24 Hour and press Select .
4. Press
n to return to standby mode.