User's Guide
Table Of Contents
- 1. Getting started
- 2. Getting to know your phone
- 3. Using the phone
- 4. Contacts
- 5. Clock and alarm
- 6. Call control
- 6.1 Call barring
- 6.2 Call block
- 6.2.1 Block all international calls
- 6.2.2 Block all private calls
- 6.2.3 Block all unavailable calls
- 6.2.4 Block all payphone calls
- 6.2.5 Turn call block on / off
- 6.2.6 Add a number to the call block list
- 6.2.7 Edit a number in the call block list
- 6.2.8 Delete a number from the call block list
- 6.2.9 Delete the blocked list
- 7. Caller ID and calls list
- 8. Handset settings
- 9. Advanced settings
- 10. Registration
- 11. Software version
- 12. Using your Answering Machine
- 12.1 Switch the answering machine on / off
- 12.2 Listening to messages
- 12.3 Adjust the speaker volume
- 12.4 Delete messages
- 12.5 Announcement
- 12.6 Record a memo
- 12.7 Answer settings
- 12.8 Remote access
- 12.9 Remote access on/off and setting the remote access PIN
- 12.10 Change the remote access PIN
- 12.11 Memory full
- 13. Help
- 14. Technical Specifications
- 15. General information
25
Contacts
4.5 Enter a pause
If your CD5 is connected to a switchboard, you may need to enter a pause in a
stored number. This gives the switchboard time to get an outside line. A pause
is normally stored after the switchboard access code (e.g. 9). You can also add
a pause when dialing a number manually.
1. When storing or dialing a number, press and hold
0 until the display
shows
P.
You can then continue storing/dialing the phone number.
4.6 Edit an entry
1. Press B. Display shows the first entry.
2. Scroll
u or d to the entry you want to edit and press
Options
. Scroll d to
Edit contact
and press
OK
.
3. Edit the name and press
OK
to confirm. Use
Clear
to delete characters.
4. Edit the number. Press
Save
to confirm. Use
Clear
to delete digits.
5. Press e to return to standby.
4.7 Delete an entry
1. Press B. Display shows the first entry.
2. Scroll to the entry you want to delete and press
Options
.
3. Scroll
d to
Delete contact
and press
OK
.
4. Display shows
Are you sure?
. Press
Yes
.
5. Press e to return to standby.
4.8 Memory status
You can check how much memory you have in your contacts list.
1. Press
B. Display shows the first entry.
2. Press
Options
, scroll d to
Memory status
and press
OK
.
3. The display shows the number of used and free entries in the contacts list.
4. Press e to return to standby.
4.9 Delete all entries
1. Press B. Display shows the first entry.
2. Press
Options
, scroll d to
Delete all contacts
and press
OK
.
3. Display shows
Are you sure?
. Press
Yes
.
4. Press e to return to standby.