User's Guide

9
Getting started
Connecting the base
1. Plug the telephone line cord into the socket marked on the underside of
the base and the other end of the line cord into the telephone line wall jack.
2. Plug the AC power jack into the socket marked on the underside of the
base and plug the AC adaptor into the AC power outlet. Switch on the AC
power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert
the rechargeable Ni-MH battery cells supplied. Please note the ’+’ and
’-’ markings inside the battery compartment and insert in the correct
direction.
2. Slide the battery cover back into place.
3. When charging the battery pack for the first time, place the handset on the
base to charge for at least 16 hours continuously.
4. When the handset is fully charged, f will appear steadily on the display.
Plug the other end of the telephone line cord (make sure that one end is
already plugged into the base) into the telephone wall socket.
1
2
Press
down
Slide