Installation Instructions

1. Turn off electrical power at fuse or circuit breaker box before wiring
fixture to the power supply.
2. Make sure all electrical and grounded connections are in accordance with
the National Electrical Code and applicable local code requirements.
3. All wiring connections should be compliant with UL standard.
1. Wear gloves and safety glasses all the time when moving luminaire from
carton, installing, servicing or performing maintenance.
2. Avoid direct eye exposure to the light source while it is on. Or this may
cause irreparable damage to the eyes.
3. Account for small parts and destroy packing material, as these may be
hazardous to children.
1. Allow fixture to cool before touch.
2. Do not exceed maximum wattage marked on luminaire label."
Attention: lights must to be installed by the experienced household wire
installer or a qualified electrician, Electrical system and
the electrical connection method of light fixture must conform to the
national electrical standards and specification
requirements of the local architecture."
Ref. Parts
Parameter
1
Illumination output: approx. 5000 lumens / 5000K
Wattage: 47W
Power source: AC120V/60Hz
Detection range: up to 70feet (21.3m), 240 degree
2
3
4
PREPARATION
Tools required for assembly (not included): phillips screwdriver, safety
goggles, power drill and ladder.
1. Please read all warning and instruction labels which are included in the
box and fixture to avoid personal injury, property damage caused by fire,
cuts, bruises, death and other dangers.
2. Please follow these general precautions before installing, maintaining, or
fixing.
Small Mounting BoltLight fixture Decorative Cover
A B C
Mounting BracketMounting Plate #6-32 X 1/2”
Junction Box Screw
D E F x 2
Large Mounting Bolt
(pre-installed)
#8-32 X 1/2”
Junction Box Screw
G x 2 H
Wire Nut
I x 3
2