Installation Instructions

2. 4 Working Modes
• Test mode: check the light’s sensory function in order to test
the sensory range. The time duration for the light will be 5s.
• Auto: when motion is detected, the light will turn on automatically
for the time set (can choose 1, 3 or 7mins) at night.
• On: The light will stay on when it is switched on and turn off
when it is switched off by light switch, whether it is day or at
Night.
• D2D: The light automatically lights up at night time and turns
off during daylight.
3. TIME Setting
This setting is used to control the time span of how long the light
remains on when motion is deteced.Set the switch to the 1, 3, 7
minutes position. The security light will stay on as long as motion is
detected and will go off after the time span you set after no motion
is detected.
4. Linkable Channels Setting
This setting has 4 channels. As long as you choose “linkable”
security light or sensors from Home Zone Security, selecting a
specific channel to connect all linkable security lights and sensors.
They will be grouped as an invisible system and working together.
One linkable light triggered, all linkable lights on.
CHANNELS
MODE
TEST
1min 3min 7min
AUTO D2DON
CH1 CH2 CH3 CH4
7