User manual

allow drag & drop, or make it just too clumsy, so the plugin will guide you a different way.
You are allowed to use the software on all your machines, but only you are allowed to operate the software. The licences are "to-person" as defined in
the licence terms, therefore you can use the software on all your computers, but you are the only person allowed to operate them. MeldaProduction
can provide a specialized licence for facilities such as schools with different licence terms.
MELDAPRODUCTION MDRUMMER
INTRODUCTION TO MDRUMMER
Following information should give you a good start for using MDrummer, your ultimate virtual drummer. First a few basic advices.
If you want MDrummer to play notes, use MIDI channel 10 or switch to drum pad
mode.
GM MIDI defines channel 10 to be used for drums. MDrummer follows this rule. MIDI channels 1 to 9 are used to control MDrummer's rhythm system
and channel 10 is used for normal MIDI notes.
Alternatively you can switch MDrummer to so-called drum pad mode - click the "Switch to drum pad mode" button in the title of the rhythms panel
on the main screen.
This way you disable the MIDI command method completely and all MIDI channels will be used for notes. You will still be able to use the virtual
drummer using the integrated song sequencer (see Song tab).
To use MDrummer's rhythm engine you can use the MIDI command system or the
integrated song sequencer.
Integrated sequencer is available in the "Song" tab. It is very simple to build a song this way even with multiple rhythms. It synchronizes with your
host automatically.