manual

ManualsBrandsMELICONI ManualsRemote ControlsDigital 2 smart

USING THE KEYS AND FUNCTIONS

The functions described below are only available

if they are already foreseen by your TV.

Keep this booklet in case you ever need to consult us in the future.

Thanks to the enclosed CD and to the on-line guide on the site www.meliconi.com/guide it is

even easier and faster to programme the remote control and discover all the potential offered

by the DIGITAL 2 SMART.

SET-UP

Read these instructions carefully before programming your remote control!

Thanks to its large database and numerous functions the DIGITAL 2 SMART remote control is ideal for

replacing up to 2 remote controls of any brands for TV - STB (digital terrestrial or satellite decoder).

Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.

Thank you for choosing a MELICONI remote control.

DIGITAL 2 SMART

Keys for selecting which appliance

you want to use

ON/OFF key for the appliance

Number keys

To select an external input terminal

To select the next (P+) or previous

(P-) channel or program

Control the volume using +/ -

Specific area for digital terrestrial

or satellite decoder

To access the MENU

Teletext keys

Confirm key

To move around within the MENU

or to control the

BRIGHTNESS/COLOUR

Fastext functions or to select

submenus by means of the

colours

Impact-proof rubber casing

Light indicator

Summary of content (5 pages)

PAGE 1
GB DIGITAL 2 SMART Thank you for choosing a MELICONI remote control. Thanks to its large database and numerous functions the DIGITAL 2 SMART remote control is ideal for replacing up to 2 remote controls of any brands for TV - STB (digital terrestrial or satellite decoder). Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps. Keep this booklet in case you ever need to consult us in the future.
PAGE 2
FITTING THE BATTERIES Before programming and using the remote control, fit the batteries. The remote control requires 2 new AAA/LR03 batteries. Insert the batteries as shown: • Change the batteries if the light indicator starts to flash during use. The batteries are low. • Make a note of the codes for your appliances on the adhesive label inside the battery cover in case you have to reprogramme your remote control.
PAGE 3
N.B. THE LIGHT INDICATOR STOPS FLASHING The remote control exits programming mode and the light indicator stops flashing: • if no keys are pressed for 14 seconds • if an invalid brand code is entered • if a key other than ON/OFF is accidentally pressed • if the end of the code search list has been reached. In this case, consult the website www.meliconi.
PAGE 4
PROGRAMMING BY INSERTING THE APPLIANCE CODE If, when consulting the on-line guide at www.meliconi.com/guide, you find the exact code for the appliance to program the remote control, insert the code as follows: 1. Hold down the selection key for the appliance to be programmed for 5 seconds. 5 SEC. or 2. When the key is released, it will start to flash. Insert the code within 15 seconds (e.g.: TV 1100). Three flashes indicate that the operation has been completed correctly.
PAGE 5
PR OBLEM SOLVING PROBLEM The appliance does not respond and the light indicator does not light up when a key is pressed. SOLUTION Test some other widely used keys. If the problem persists, check that the batteries are fitted correctly. If necessary, replace them with 2 new 1.5 V AAA/LR03 batteries. The appliance does not respond but the light indicator lights up. Check that the batteries are new and that the remote control is pointing at the TV without any obstacles in the way.